RedVector OSHA10-6

OSHA 10 Hour Construction: Module 06 - Cranes

OSHA 10 Hour Construction: Module 06 - Cranes

1 hr. Online Course

Level: Fundamental

Item#: OSHA10-6

SME: Dan Johnson, CSP (SFI Compliance Inc.)

Moving large, heavy loads is critical to the manufacturing and construction industries, but unfortunately, cranes, derricks, hoists, and other lifting devices pose significant safety issues for both their operators and for workers in proximity to them. The rules are complex and often out of date; here, we give OSHA-Subpart N-recommended, ANSI-based tips for safe usage and cover cranes, derricks, hoists, elevators and conveyors.
 
 

OSHA recommends Outreach Training Program courses as an orientation to occupational safety and health for workers.  Workers must receive additional training, when required by OSHA standards, on the specific hazards of their job.

Course Objectives

Upon completion of the lesson, participants will be able to: 

  • List the four major causes of crane accidents
  • Describe the preplanning that is required before putting a crane into use
  • State the two main precautions that apply to working with cranes near power lines
SUBJECT MATTER EXPERT: Dan Johnson, CSP (SFI Compliance Inc.)
Dan Johnson, CSP  (SFI Compliance Inc.) Photo
Dan Johnson, CSP, is an experienced and integrity driven Environmental, Health and Safety (EHS) professional with over 20 years of accomplishments and success on a national level. He is a Certified Safety Professional with the Board of Certified Safety Professionals. Currently the Managing Partner of SFI Compliance Inc. (www.sficompliance.com), he has also been a safety director for two national home builders and a national utility contractor, as well as numerous years as a safety consultant specializing in the construction industry. He is a skillful designer of EHS programs who has effectively executed those programs within a wide range of industries. Dan has expertise in changing the work environment through behavior based safety, while maintaining productivity. His progressive leadership experiences have produced a passion for surpassing objectives and adding value to the organization. He has extensive knowledge working with multiple jurisdictions to ensure compliance, including: OSHA, DOL, DOT, EPA, USACE and some State and Local municipalities.
 
Dan is also the author of “Jobsite First Aid—A Field Guide for the Construction Industry” and “DeWALT Construction Safety and OSHA Handbook.”