RedVector RV-10452

Worksite Safety 04: OSHA Struck-By & Caught-Between Accidents

Worksite Safety 04: OSHA Struck-By & Caught-Between Accidents

1.5 hrs. Online Course

Level: Fundamental

Item#: RV-10452

SME: Dan Johnson, CSP (SFI Compliance Inc.)

“Struck-by” and “caught-between” accidents are major causes of injuries and fatalities on construction worksites. Struck-by incidents are classified as accidents where workers are hit by swinging booms, falling objects (such as bricks from a scaffold), or flying objects (such as particles flying off an object being drilled or ground by a power tool). Caught-between accidents are often fatal occurrences when a worker is unwittingly caught in the gears of machinery; pinned between a vehicle and a wall, or even caught by the clothing or hair on a moving part and pulled into danger. This interactive online course provides information to assist the learner in the identification, avoidance, and control of these hazards in the workplace. While workers may need additional training based on OSHA standards and the specific hazards of their jobs, RedVector’s Worksite Safety courses can help inject entry-level workers with critical knowledge on a variety of OSHA-regulated safety and health topics.

OSHA recommends Outreach Training Program courses as an orientation to occupational safety and health for workers. Workers must receive additional training, when required by OSHA standards, on the specific hazards of their job.
 
Please note: This course is not a part of the OSHA 10 Hour Construction Program. 
Course Objectives
Lesson Objectives: Struck-By Accidents
 
Terminal Objective: Given current OSHA and industry information regarding construction worksite illnesses, injuries and/or fatalities, the student will be able to recognize Caught-in or -between hazards in construction.
 
Enabling Objectives:
  • Identify common caught-in or -between hazards
  • Describe types of caught-in or -between hazards
  • Protect themselves from caught-in or -between hazards
  • Recognize employer requirements to protect workers from caught-in or -between hazards
Lesson Objectives: Caught-In or -Between Hazards
 
Terminal Objective: Given current OSHA and industry information regarding construction worksite illnesses, injuries and/or fatalities, the student will be able to recognize Caught-in or -between hazards in construction.
 
Enabling Objectives:
  • Identify common caught-in or -between hazards
  • Describe types of caught-in or -between hazards
  • Protect themselves from caught-in or -between hazards
  • Recognize employer requirements to protect workers from caught-in or -between hazards
SUBJECT MATTER EXPERT: Dan Johnson, CSP (SFI Compliance Inc.)
Dan Johnson, CSP  (SFI Compliance Inc.) Photo
Dan Johnson, CSP, is an experienced and integrity driven Environmental, Health and Safety (EHS) professional with over 20 years of accomplishments and success on a national level. He is a Certified Safety Professional with the Board of Certified Safety Professionals. Currently the Managing Partner of SFI Compliance Inc. (www.sficompliance.com), he has also been a safety director for two national home builders and a national utility contractor, as well as numerous years as a safety consultant specializing in the construction industry. He is a skillful designer of EHS programs who has effectively executed those programs within a wide range of industries. Dan has expertise in changing the work environment through behavior based safety, while maintaining productivity. His progressive leadership experiences have produced a passion for surpassing objectives and adding value to the organization. He has extensive knowledge working with multiple jurisdictions to ensure compliance, including: OSHA, DOL, DOT, EPA, USACE and some State and Local municipalities.
 
Dan is also the author of “Jobsite First Aid—A Field Guide for the Construction Industry” and “DeWALT Construction Safety and OSHA Handbook.”
State Licenses
AL - Engineer (General - ,)
AR - Engineer (General - ,)
CA - Water Operator (Grade T1 and D1) (Safety)
CA - Water Operator (Grade T2 and D2) (Safety)
CA - Water Operator (Grade T3 and D3) (Safety)
CA - Water Operator (T4, T5, D4 and D5) (Safety)
DE - Engineer (General - ,)
GA - Architect (General - RV1790-2026)
Accreditation: AIA Registered Provider J315
GA - Engineer (General - ,)
IA - Engineer (General - ,)
ID - Engineer (General - ,)
IL - Architect (General - RV1790-2026)
Accreditation: AIA Registered Provider J315
IL - Engineer, Professional (General - ,)
IL - Engineer, Structural (General - ,)
IN - Architect (General - RV1790-2026)
Accreditation: AIA Registered Provider J315
KS - Architect (General - RV1790-2026)
Accreditation: AIA Registered Provider J315
KS - Engineer (General - ,)
KY - Engineer (General - ,)
LA - Engineer (General - ,)
MA - Electrician (General)
MD - Engineer (General - ,)
ME - Engineer (General - ,)
MI - Engineer (General - ,)
MN - Engineer (General - ,)
MO - Architect (General - RV1790-2026)
Accreditation: AIA Registered Provider J315
MO - Engineer (General - ,)
MS - Engineer (General - ,)
MT - Engineer (General - ,)
NC - Engineer (General - ,)
ND - Engineer (General - ,)
NE - Architect (General)
Accreditation: Vector Solutions is authorized by IACET to offer 0.15 CEUs for this program
NE - Architect (General - RV1790-2026)
Accreditation: AIA Registered Provider J315
NE - Engineer (General)
Accreditation: Vector Solutions is authorized by IACET to offer 0.15 CEUs for this program
NH - Engineer (General - ,)
NJ - Architect (General - RV1790-2026)
Accreditation: AIA Registered Provider J315
NJ - Engineer (General - 24GP000006300)
NM - Engineer (General - ,)
NV - Engineer (General - ,)
NY - Architect (General - RV1790-2026)
Accreditation: AIA Registered Provider J315
NY - Engineer (General)
Accreditation: Vector Solutions is authorized by IACET to offer 0.15 CEU for this program.
OH - Engineer (General - ,)
OK - Engineer (General - ,)
OR - Engineer (General - ,)
PA - Code Official,Certified (UCC) (General)
PA - Engineer (General - ,)
PR - Engineer (General - ,)
SC - Engineer (General - ,)
SD - Architect (General - RV1790-2026)
Accreditation: AIA Registered Provider J315
SD - Engineer (Technical - ,)
TN - Architect (General - RV1790-2026)
Accreditation: AIA Registered Provider J315
TN - Engineer (General - ,)
TX - Engineer (General - ,)
UT - Electrician (Professional Education - 21267)
UT - Engineer (General - ,)
UT - Plumber (Core - 21267)
VA - Architect (General - RV1790-2026)
Accreditation: AIA Registered Provider J315
VA - Engineer (General - ,)
VT - Engineer (General - ,)
WA - Architect (General - RV1790-2026)
Accreditation: AIA Registered Provider J315
WI - Architect (General - RV1790-2026)
Accreditation: AIA Registered Provider J315
WI - Engineer (General - ,)
WV - Engineer (General - ,)
WY - Engineer (General - ,)
Professional Organizations
American Academy of Environmental Engineers - AAEES - Member (General - ,)
American Hospital Association - AHA - Certified Healthcare Facility Manager (CHFM) (General)
American Institute of Architects - AIA - Architects (General - RV1790-2026)
Accreditation: AIA Registered Provider J315
Board of Certified Safety Professionals - BCSP - Certification (General)
BOMI International - RPA, FMA and/or SMA (General)
Building Operator Certification - BOC - Certification (General)
Canada - Alberta Architect (General - RV1790-2026)
Accreditation: AIA Registered Provider J315
Canada - Alberta Engineer (General - ,)
Canada - British Columbia Architect (AIBC) (General - RV1790-2026)
Accreditation: AIA Registered Provider J315
Canada - British Columbia Engineer (General - ,)
Canada - Manitoba Architect (General - RV1790-2026)
Accreditation: AIA Registered Provider J315
Canada - Manitoba Engineer (General - ,)
Canada - New Brunswick Architect (General - RV1790-2026)
Accreditation: AIA Registered Provider J315
Canada - New Brunswick Engineer (General - ,)
Canada - Newfoundland and Labrador Engineer (General - ,)
Canada - Northwest Territories and Nunavut Engineer (General - ,)
Canada - Northwest Territory Architect / Restricted Practitioner (General - RV1790-2026)
Accreditation: AIA Registered Provider J315
Canada - Nova Scotia Architect (General - RV1790-2026)
Accreditation: AIA Registered Provider J315
Canada - Nova Scotia Engineer (General - ,)
Canada - Ontario Architect (General - RV1790-2026)
Accreditation: AIA Registered Provider J315
Canada - Ontario Engineer (General - ,)
Canada - Prince Edward Island Architect (General - RV1790-2026)
Accreditation: AIA Registered Provider J315
Canada - Prince Edward Island Engineer (General - ,)
Canada - Quebec Architect (General - RV1790-2026)
Accreditation: AIA Registered Provider J315
Canada - Quebec Engineer (General - ,)
Canada - Saskatchewan Architect (General - RV1790-2026)
Accreditation: AIA Registered Provider J315
Canada - Saskatchewan Engineer (General - ,)
Canada - Yukon Engineer (General - ,)
Canadian Registered Safety Professionals - CRSP (Safety)
Institute of Hazardous Materials Management - IHMM - Certification (General)
International Facility Management Association - IFMA - Certified Facility Manager (CFM) (General)
International Maintenance Institute - IMI - Certifications (CMT, CMP, CMM, CWWMT) (General)
National Institute for Certification in Engineering Technologies - NICET (General - ,)
Ontario Association of Certified Engineering Technicians and Technologists - OACETT - Certified Member (Contribution to Technical Knowledge)