RedVector RV-10574AW

Mold Safety and Health

Mold Safety and Health

1 hr. Online Course

Level: Fundamental

Item#: RV-10574AW

SME: Michael A. Pinto, CSP, CMP

USD$29.95 InStock 2029-01-01
add to cart Get More With a Subscription! Request a Demo For Your Company
Workplace safety and health for the remediation contractor is much more than just another policy. It’s about people and profit. This course will help you understand the unique concerns of this industry and how to turn hassle into habit. From hazard communication and project documentation to practical on-site safety tips, this course will prepare you to lead your team toward a practice of better and safer projects.
Objectives SME Course Applies to
Course Objectives
At the conclusion of this course, you will be able to:
  • Recognize the signs of heat related disorders and the initial steps to take in response
  • Explain the difference between “General Industry” OSHA regulations and their regulations for “Construction”
  • List the most common safety concerns on the project site
  • Demonstrate recent changes to the hazard communication requirements for your company
SUBJECT MATTER EXPERT: Michael A. Pinto, CSP, CMP
Michael A. Pinto, CSP, CMP Photo
Michael A. Pinto, CSP, CMP, is chief executive officer of Wonder Makers Environmental, Inc., a manufacturing and environmental consulting firm that specializes in identification and control of asbestos, lead, IAQ, mold, industrial hygiene, and chemical problems. Mr. Pinto is the author of over 150 published articles and several books including, Fungal Contamination: A Comprehensive Guide for Remediation. He completed doctoral course work in environmental engineering and holds numerous certifications in the environmental and safety areas including Certified Safety Professional and Certified Mold Professional. He was selected as part of the Mitigation Assessment Team for FEMA following Hurricanes Katrina and Rita. He was the lead author on the FEMA Fact Sheet Cleaning Flooded Buildings after Hurricane Sandy and was a contributor to the EPA’s Healthy Homes Initiative. He was a contributor to the section of the A.M. Best Underwriting Guide related to mold remediation and restoration contractors.
State Licenses
Alaska
AK - Engineer (Health, Safety & Welfare - ,)
Alabama
AL - Engineer (General - ,)
AL - Interior Designer (Health, Safety & Welfare - CC-117987-1000)
Arkansas
AR - Engineer (General - ,)
AR - Interior Designer (Health, Safety & Welfare - CC-117987-1000)
California
CA - Interior Designer, Certified (General - CC-117987-1000)
Connecticut
CT - Interior Designer (General - CC-117987-1000)
District Of Columbia
DC - Interior Designer (Health, Safety & Welfare - CC-117987-1000)
Delaware
DE - Engineer (General - ,)
Florida
FL - Building Code Administrator (General - 0610879)
Accreditation: FL DBPR Approved Provider 0001771
FL - Contractor, Certified (General - 0610879)
Accreditation: FL DBPR Approved Provider 0001771
FL - Contractor, Palm Beach County (General - 0610879)
Accreditation: FL DBPR Approved Provider 0001771
FL - Contractor, Pinellas County (General - 0610879)
Accreditation: FL DBPR Approved Provider 0001771
FL - Contractor, Registered (General - 0610879)
Accreditation: FL DBPR Approved Provider 0001771
FL - Engineer (General - 0000271)
Accreditation: FBPE Approved Provider 33
FL - Examiner (General - 0610879)
Accreditation: FL DBPR Approved Provider 0001771
FL - Home Inspector (General - 0610879)
Accreditation: FL DBPR Approved Provider 0001771
FL - Inspector (General - 0610879)
Accreditation: FL DBPR Approved Provider 0001771
FL - Interior Designer (General, Health, Safety & Welfare - RV1704-2026)
Accreditation: AIA Registered Provider J315
Georgia
GA - Architect (General - RV1704-2026)
Accreditation: AIA Registered Provider J315
GA - Engineer (General - ,)
GA - Interior Designer (Health, Safety & Welfare - CC-117987-1000)
Iowa
IA - Engineer (General - ,)
IA - Interior Designer (Health, Safety & Welfare - CC-117987-1000)
Idaho
ID - Engineer (General - ,)
Illinois
IL - Architect (General - RV1704-2026)
Accreditation: AIA Registered Provider J315
IL - Engineer, Professional (General - ,)
IL - Engineer, Structural (General - ,)
Indiana
IN - Architect (General - RV1704-2026)
Accreditation: AIA Registered Provider J315
IN - Interior Designer (General - CC-117987-1000)
Kansas
KS - Architect (General - RV1704-2026)
Accreditation: AIA Registered Provider J315
KS - Engineer (Health, Safety & Welfare - ,)
Kentucky
KY - Engineer (General - ,)
KY - Interior Designer (Health, Safety & Welfare - CC-117987-1000)
Louisiana
LA - Engineer (General - ,)
LA - Interior Designer (Health, Safety & Welfare - 12.999294.23)
Maryland
MD - Engineer (General - ,)
MD - Interior Designer, Certified (Health, Safety & Welfare - CC-117987-1000)
Maine
ME - Engineer (General - ,)
Michigan
MI - Engineer (General - ,)
Minnesota
MN - Engineer (General - ,)
MN - Interior Designer (General - CC-117987-1000)
Missouri
MO - Architect (General - RV1704-2026)
Accreditation: AIA Registered Provider J315
MO - Engineer (General - ,)
MO - Interior Designer (General - CC-117987-1000)
Mississippi
MS - Engineer (General - ,)
MS - Interior Designer (Health, Safety & Welfare - CC-117987-1000)
Montana
MT - Engineer (General - ,)
North Carolina
NC - Engineer (General - ,)
NC - Interior Designer, Registered (Health, Safety & Welfare - CC-117987-1000)
North Dakota
ND - Engineer (Health, Safety & Welfare - ,)
Nebraska
NE - Architect (General, Health, Safety & Welfare)
Accreditation: Vector Solutions is authorized by IACET to offer 0.10 CEUs for this program
NE - Architect (General, Health, Safety & Welfare - RV1704-2026)
Accreditation: AIA Registered Provider J315
NE - Engineer (General)
Accreditation: Vector Solutions is authorized by IACET to offer 0.10 CEUs for this program
New Hampshire
NH - Engineer (General - ,)
New Jersey
NJ - Architect (General - RV1704-2026)
Accreditation: AIA Registered Provider J315
NJ - Engineer (General - 24GP000006300)
NJ - Interior Designer (Health, Safety & Welfare - CC-117987-1000)
New Mexico
NM - Engineer (General - ,)
NM - Interior Designer (Health, Safety & Welfare - CC-117987-1000)
Nevada
NV - Engineer (General - ,)
NV - Interior Designer (Health, Safety & Welfare - CC-117987-1000)
New York
NY - Architect (General - RV1704-2026)
Accreditation: AIA Registered Provider J315
NY - Engineer (General)
Accreditation: Vector Solutions is authorized by IACET to offer 0.1 CEU for this program.
Ohio
OH - Engineer (General - ,)
Oklahoma
OK - Engineer (General - ,)
OK - Interior Designer (Health, Safety & Welfare - CC-117987-1000)
Oregon
OR - Contractor, Residential (General - SRA2607)
Accreditation: Provider ID: 2014RCE0077; Vector Solutions is responsible for the content of this course.
OR - Engineer (General - ,)
Pennsylvania
PA - Code Official,Certified (UCC) (General)
PA - Engineer (General - ,)
Puerto Rico
PR - Engineer (General - ,)
South Carolina
SC - Engineer (General - ,)
South Dakota
SD - Architect (General - RV1704-2026)
Accreditation: AIA Registered Provider J315
SD - Engineer (Technical - ,)
Tennessee
TN - Architect (General - RV1704-2026)
Accreditation: AIA Registered Provider J315
TN - Engineer (Health, Safety & Welfare - ,)
TN - Interior Designer (Health, Safety & Welfare - CC-117987-1000)
Texas
TX - Contractor, Air Conditioning and Refrigeration (General - 28611)
Accreditation: TDLR CE Provider #1041
TX - Engineer (General - ,)
TX - Interior Designer (Health, Safety & Welfare - CC-117987-1000)
Utah
UT - Engineer (General - ,)
UT - Interior Designer, Certified Commercial (Health, Safety & Welfare - CC-117987-1000)
Virginia
VA - Architect (General - RV1704-2026)
Accreditation: AIA Registered Provider J315
VA - Engineer (General - ,)
Vermont
VT - Engineer (General - ,)
Washington
WA - Architect (General - RV1704-2026)
Accreditation: AIA Registered Provider J315
Wisconsin
WI - Architect (General - RV1704-2026)
Accreditation: AIA Registered Provider J315
WI - Engineer (General - ,)
WI - Interior Designer (General - CC-117987-1000)
West Virginia
WV - Engineer (General - ,)
Wyoming
WY - Engineer (General - ,)
Professional Organizations
American Academy of Environmental Engineers - AAEES - Member (General - ,)
American Council for Accredited Certification - ACAC - Member (General)
Accreditation: RedVector is an independent course provider not affiliated with the American Council for Accredited Certification (ACAC). ACAC does not develop, accredit or approve training courses, nor does it contract with course providers.
American Hospital Association - AHA - Certified Healthcare Facility Manager (CHFM) (General)
American Institute of Architects - AIA - Architects (General - RV1704-2026)
Accreditation: AIA Registered Provider J315
American Society of Interior Designers - ASID - Member (Health, Safety & Welfare - CC-117987-1000)
Board of Certified Safety Professionals - BCSP - Certification (General)
BOMI International - RPA, FMA and/or SMA (General)
Building Operator Certification - BOC - Certification (General)
Canada - Alberta Architect (General - RV1704-2026)
Accreditation: AIA Registered Provider J315
Canada - Alberta Engineer (General - ,)
Canada - British Columbia - Residential Builder (General)
Canada - British Columbia Architect (AIBC) (General - RV1704-2026)
Accreditation: AIA Registered Provider J315
Canada - British Columbia Engineer (General - ,)
Canada - Manitoba Architect (General - RV1704-2026)
Accreditation: AIA Registered Provider J315
Canada - Manitoba Engineer (General - ,)
Canada - New Brunswick Architect (General - RV1704-2026)
Accreditation: AIA Registered Provider J315
Canada - New Brunswick Engineer (General - ,)
Canada - Newfoundland and Labrador Engineer (General - ,)
Canada - Northwest Territories and Nunavut Engineer (General - ,)
Canada - Northwest Territory Architect / Restricted Practitioner (General - RV1704-2026)
Accreditation: AIA Registered Provider J315
Canada - Nova Scotia Architect (General - RV1704-2026)
Accreditation: AIA Registered Provider J315
Canada - Nova Scotia Engineer (General - ,)
Canada - Ontario Architect (General - RV1704-2026)
Accreditation: AIA Registered Provider J315
Canada - Ontario Engineer (General - ,)
Canada - Prince Edward Island Architect (General - RV1704-2026)
Accreditation: AIA Registered Provider J315
Canada - Prince Edward Island Engineer (General - ,)
Canada - Quebec Architect (General - RV1704-2026)
Accreditation: AIA Registered Provider J315
Canada - Quebec Engineer (General - ,)
Canada - Saskatchewan Architect (General - RV1704-2026)
Accreditation: AIA Registered Provider J315
Canada - Saskatchewan Engineer (General - ,)
Canada - Yukon Engineer (General - ,)
Canadian Registered Safety Professionals - CRSP (Safety)
Institute of Hazardous Materials Management - IHMM - Certification (General)
Interior Design Continuing Education Council - IDCEC (Health, Safety & Welfare - CC-117987-1000)
Interior Design Society - IDS - Member (General - CC-117987-1000)
Interior Designers of Canada - IDC - Member (General - CC-117987-1000)
International Facility Management Association - IFMA - Certified Facility Manager (CFM) (General)
International Interior Design Association - IIDA - Professional or Associate Member (General - CC-117987-1000)
International Maintenance Institute - IMI - Certifications (CMT, CMP, CMM, CWWMT) (General)
International Society of Automation - ISA - Certifications (General)
National Council for Interior Design Qualification - NCIDQ - Certified Designer (General - CC-117987-1000)
National Institute for Certification in Engineering Technologies - NICET (General - ,)
National Kitchen & Bath Association - NKBA - Certified Member (General - CC-117987-1000)
Ontario Association of Certified Engineering Technicians and Technologists - OACETT - Certified Member (Contribution to Technical Knowledge)