TX - 2026 NEC Changes: Branch Circuits, Feeders, and Services (PGM)

After successfully completing this course, you will be able to:
Part 1
• Recall key definitions used frequently in the trade
• List the required on-the-job training for a license issued by the department
• Describe the application process for an applicant and the required exam
• Recall the frequency and fees in which licensees must renew their license with the Texas Department of Regulations (TDLR)
• List the Electrical Contractors’ responsibilities
• List the responsibilities of all persons performing electrical work
• Recall the Standards of Conduct within any geographic location in the state when performing or offering to perform electrical work

Part 2
• Discuss the global changes that occurred in the 2024 edition.
• Define what an electrically safe work condition is and when it is required.
• Understand the process of establishing and verifying an electrically safe work condition.
• Explain why the boundaries of the electric shock approach were changed and how to address high-altitude installations.
• Describe the requirements for arc flash signage.
• Verify the PPE requirements for hand protection.
Part 3
• Recall the conductor marking requirements for branch circuits
• Describe the revised requirements for GFCIs in the 2026 NEC
• Discuss the requirements for ground-fault protection of equipment for branch circuits
• Recall the requirements for dormitories with permanent cooking facilities
• Explain when 10 ampere branch circuits are allowed and when they are prohibited
• Indicate where accessibility requirements for dwelling unit construction can be found
• Explain the rules for dwelling unit receptacles
• State when a receptacle is required in electrical rooms
• Explain when lighting from an adjacent area can be used as required lighting
• Describe where the code covers branch circuits exceeding 1,000 volts

Part 4
• Explain how Article 215 works with Article 225.
• List the rules for a building disconnecting means.
• Recall which equipment is required to be listed in Article 230.
• Identify the minimum conductor size for services.
• Explain the rules for splicing equipment on the line side of the service equipment.
• List the requirements for surge protection at services.
• Describe the requirements for meter sockets supplying fire pumps.
• Discuss the requirements for the service equipment at dwellings.
• Recall the types of equipment allowed on the supply side of the service equipment.