RedVector RV-10683

Green Design: Introduction to High Performance Building Design (Based on LEED v4)

Green Design: Introduction to High Performance Building Design (Based on LEED v4)

3 hrs. Online Course

Level: Fundamental

Item#: RV-10683

SME: Richard Kelso

USD$119.85 InStock 2029-01-01
add to cart Get More With a Subscription! Request a Demo For Your Company
There is consensus among the majority of scientists that the climate of the earth is changing in the direction of higher temperatures and that some of the change is anthropomorphic (caused by human activity). This course is intended to address that portion of the human contribution to climate change that is related to energy use in buildings.
 
In this course, we will look at the ways buildings use energy and how buildings can be designed for high energy performance. It is important that architects and designers understand and are aware of the resources and methods available for improving building designs in the future. A major piece to understanding sustainable building design is also understanding th requirements of the Energy and Atmosphere category of LEED v4 Building Design and Construction (BD+C).
Objectives SME Course Applies to
Course Objectives

At the conclusion of this course, you will be able to:

  • Explain and identify how building design and construction can impact the health and wellbeing of the people within and the surrounding environment
  • Define and identify energy use and its effects on buildings and the safety and welfare of the people within and around
  • Describe the three options for Daylight LEED v4 credits and their impacts on the environment
  • Explain the proper use and storage of refrigerants used in vapor compression systems ensures a safe environment for building occupants and the environment.
  • Describe and identify the process to ensure that a building is operating at peak efficiencies to maintain a safe environment for people and the surrounding area
  • List the LEED requirements for the facility requirements and operations maintenance plan
  • Identify and explain the LEED Credit and prerequisites for Energy and Atmosphere
SUBJECT MATTER EXPERT: Richard Kelso
Richard Kelso Photo
University of Tennessee
College of Architecture and Design
Professor
P.E., NCEE, Ph.D.

Dick was born in Knoxville, graduated from UT with a BSME and began work with Trane in Chattanooga in 1960. He joined Geo. S. Campbell & Associates in 1968 and earned an MSME from UT in 1971. He became Facilities Planning Engineer for UT in 1971 and joined the faculty of the College of Architecture in 1976, where he is currently a Professor.
He started a consulting engineering practice in 1974, and after joining forces with John Regen, it became Kelso-Regen Associates in 1989. Over the course of 26 years of managing this practice the firm handled over 2000 building projects across the country. He retired at the end of 2000 but the firm continues.
Dick continues to teach and do research, and received a PhD from Loughborough University (UK) in 2003. He has been active in ASHRAE at the local, regional and society levels, and has been honored with the rank of Fellow and the Distinguished Service Award. He is in the first year of a three year term on the ASHRAE Board of Directors.

He and his wife Sarah have three children and five grandchildren, of whom he is very proud. 

State Licenses
Alaska
AK - Architect (General - RV1817-2026)
Accreditation: AIA Registered Provider J315
AK - Engineer (General - ,)
Alabama
AL - Architect (Health, Safety & Welfare - RV1817-2026)
Accreditation: AIA Registered Provider J315
AL - Engineer (General - ,)
Arkansas
AR - Architect (Health, Safety & Welfare - RV1817-2026)
Accreditation: AIA Registered Provider J315
AR - Engineer (General - ,)
Colorado
CO - Architect (Health, Safety & Welfare - RV1817-2026)
Accreditation: AIA Registered Provider J315
Connecticut
CT - Architect (Health, Safety & Welfare - RV1817-2026)
Accreditation: AIA Registered Provider J315
District Of Columbia
DC - Architect (Health, Safety & Welfare - RV1817-2026)
Accreditation: AIA Registered Provider J315
Delaware
DE - Architect (Health, Safety & Welfare - RV1817-2026)
Accreditation: AIA Registered Provider J315
DE - Engineer (General - ,)
Florida
FL - Architect (Health, Safety & Welfare - RV1817-2026)
Accreditation: AIA Registered Provider J315
FL - Contractor, Certified (General - 0611222)
Accreditation: FL DBPR Approved Provider 0001771
FL - Contractor, Palm Beach County (General - 0611222)
Accreditation: FL DBPR Approved Provider 0001771
FL - Contractor, Pinellas County (General - 0611222)
Accreditation: FL DBPR Approved Provider 0001771
FL - Contractor, Registered (General - 0611222)
Accreditation: FL DBPR Approved Provider 0001771
FL - Engineer (General - 0000273)
Accreditation: There is consensus among the majority of scientists that the climate of the earth is changing in the direction of higher temperatures and that some of the change is anthropomorphic (caused by human activity). This course is intended to address that portion of the human contribution to climate change that is related to energy use in buildings. In this course, we will look at the ways buildings use energy and how buildings can be designed for high energy performance.
FL - Interior Designer (Health, Safety & Welfare - RV1817-2026)
Accreditation: AIA Registered Provider J315
Georgia
GA - Architect (Health, Safety & Welfare - RV1817-2026)
Accreditation: AIA Registered Provider J315
GA - Contractor, Columbia County (General)
GA - Engineer (General - ,)
Hawaii
HI - Architect (Health, Safety & Welfare - RV1817-2026)
Accreditation: AIA Registered Provider J315
Iowa
IA - Architect (Health, Safety & Welfare - RV1817-2026)
Accreditation: AIA Registered Provider J315
IA - Engineer (General - ,)
Idaho
ID - Architect (Health, Safety & Welfare - RV1817-2026)
Accreditation: AIA Registered Provider J315
ID - Engineer (General - ,)
Illinois
IL - Architect (Health, Safety & Welfare - RV1817-2026)
Accreditation: AIA Registered Provider J315
IL - Engineer, Professional (General - ,)
IL - Engineer, Structural (General - ,)
Indiana
IN - Architect (Health, Safety & Welfare - RV1817-2026)
Accreditation: AIA Registered Provider J315
Kansas
KS - Architect (Health, Safety & Welfare - RV1817-2026)
Accreditation: AIA Registered Provider J315
KS - Engineer (Health, Safety & Welfare - ,)
Kentucky
KY - Architect (Health, Safety & Welfare - RV1817-2026)
Accreditation: AIA Registered Provider J315
KY - Engineer (General - ,)
Louisiana
LA - Architect (Health, Safety & Welfare - RV1817-2026)
Accreditation: AIA Registered Provider J315
LA - Engineer (General - ,)
LA - Interior Designer (Health, Safety & Welfare - 12.999156.23)
Massachusetts
MA - Architect (Health, Safety & Welfare - RV1817-2026)
Accreditation: AIA Registered Provider J315
Maryland
MD - Architect (Health, Safety & Welfare - RV1817-2026)
Accreditation: AIA Registered Provider J315
MD - Engineer (General - ,)
Maine
ME - Engineer (General - ,)
Michigan
MI - Architect (Health, Safety & Welfare - RV1817-2026)
Accreditation: AIA Registered Provider J315
MI - Engineer (General - ,)
Minnesota
MN - Architect (Health, Safety & Welfare - RV1817-2026)
Accreditation: AIA Registered Provider J315
MN - Engineer (General - ,)
Missouri
MO - Architect (Health, Safety & Welfare - RV1817-2026)
Accreditation: AIA Registered Provider J315
MO - Engineer (General - ,)
Mississippi
MS - Architect (Health, Safety & Welfare - RV1817-2026)
Accreditation: AIA Registered Provider J315
MS - Engineer (General - ,)
Montana
MT - Architect (Health, Safety & Welfare - RV1817-2026)
Accreditation: AIA Registered Provider J315
MT - Engineer (General - ,)
North Carolina
NC - Architect (Health, Safety & Welfare - RV1817-2026)
Accreditation: AIA Registered Provider J315
NC - Engineer (General - ,)
North Dakota
ND - Engineer (Health, Safety & Welfare - ,)
Nebraska
NE - Architect (Health, Safety & Welfare)
Accreditation: Vector Solutions is authorized by IACET to offer 0.30 CEUs for this program
NE - Architect (Health, Safety & Welfare - RV1817-2026)
Accreditation: AIA Registered Provider J315
NE - Engineer (General)
Accreditation: Vector Solutions is authorized by IACET to offer 0.30 CEUs for this program
New Hampshire
NH - Architect (Health, Safety & Welfare - RV1817-2026)
Accreditation: AIA Registered Provider J315
NH - Engineer (General - ,)
New Jersey
NJ - Architect (Health, Safety & Welfare - RV1817-2026)
Accreditation: AIA Registered Provider J315
NJ - Engineer (General - 24GP000006300)
New Mexico
NM - Architect (Health, Safety & Welfare - RV1817-2026)
Accreditation: AIA Registered Provider J315
NM - Engineer (General - ,)
Nevada
NV - Architect (Health, Safety & Welfare - RV1817-2026)
Accreditation: AIA Registered Provider J315
NV - Engineer (General - ,)
New York
NY - Architect (Health, Safety & Welfare - RV1817-2026)
Accreditation: AIA Registered Provider J315
NY - Engineer (General)
Accreditation: Vector Solutions is authorized by IACET to offer 0.3 CEU for this program.
Ohio
OH - Architect (Health, Safety & Welfare - RV1817-2026)
Accreditation: AIA Registered Provider J315
OH - Engineer (General - ,)
Oklahoma
OK - Architect (Health, Safety & Welfare - RV1817-2026)
Accreditation: AIA Registered Provider J315
OK - Engineer (General - ,)
Oregon
OR - Architect (Health, Safety & Welfare - RV1817-2026)
Accreditation: AIA Registered Provider J315
OR - Engineer (General - ,)
Pennsylvania
PA - Code Official,Certified (UCC) (General)
PA - Engineer (General - ,)
Puerto Rico
PR - Architect (Health, Safety & Welfare - RV1817-2026)
Accreditation: AIA Registered Provider J315
PR - Engineer (General - ,)
Rhode Island
RI - Architect (Health, Safety & Welfare - RV1817-2026)
Accreditation: AIA Registered Provider J315
South Carolina
SC - Architect (Health, Safety & Welfare - RV1817-2026)
Accreditation: AIA Registered Provider J315
SC - Engineer (General - ,)
South Dakota
SD - Architect (Health, Safety & Welfare - RV1817-2026)
Accreditation: AIA Registered Provider J315
SD - Engineer (Technical - ,)
Tennessee
TN - Architect (Health, Safety & Welfare - RV1817-2026)
Accreditation: AIA Registered Provider J315
TN - Engineer (Health, Safety & Welfare - ,)
Texas
TX - Architect (Sustainable Design / Energy-Efficient Design - RV1817-2026)
Accreditation: AIA Registered Provider J315
TX - Engineer (General - ,)
TX - Interior Designer (Sustainable Design / Energy-Efficient Design - RV1817-2026)
Accreditation: AIA Registered Provider J315
Utah
UT - Architect (Health, Safety & Welfare - RV1817-2026)
Accreditation: AIA Registered Provider J315
UT - Engineer (General - ,)
Virginia
VA - Architect (General - RV1817-2026)
Accreditation: AIA Registered Provider J315
VA - Engineer (General - ,)
Vermont
VT - Architect (Health, Safety & Welfare - RV1817-2026)
Accreditation: AIA Registered Provider J315
VT - Engineer (General - ,)
Washington
WA - Architect (Health, Safety & Welfare - RV1817-2026)
Accreditation: AIA Registered Provider J315
Wisconsin
WI - Architect (Health, Safety & Welfare - RV1817-2026)
Accreditation: AIA Registered Provider J315
WI - Engineer (General - ,)
West Virginia
WV - Architect (Health, Safety & Welfare - RV1817-2026)
Accreditation: AIA Registered Provider J315
WV - Engineer (General - ,)
Wyoming
WY - Architect (Health, Safety & Welfare - RV1817-2026)
Accreditation: AIA Registered Provider J315
WY - Engineer (General - ,)
Professional Organizations
American Academy of Environmental Engineers - AAEES - Member (General - ,)
American Institute of Architects - AIA - Architects (Health, Safety & Welfare - RV1817-2026)
Accreditation: AIA Registered Provider J315
Association of State Floodplain Managers - ASFPM - Certified Floodplain Manager (Core)
BOMI International - RPA, FMA and/or SMA (General)
Building Operator Certification - BOC - Certification (General)
Canada - Alberta Architect (General - RV1817-2026)
Accreditation: AIA Registered Provider J315
Canada - Alberta Engineer (General - ,)
Canada - British Columbia Architect (AIBC) (Core - RV1817-2026)
Accreditation: AIA Registered Provider J315
Canada - British Columbia Engineer (General - ,)
Canada - Manitoba Architect (General - RV1817-2026)
Accreditation: AIA Registered Provider J315
Canada - Manitoba Engineer (General - ,)
Canada - New Brunswick Architect (General - RV1817-2026)
Accreditation: AIA Registered Provider J315
Canada - New Brunswick Engineer (General - ,)
Canada - Newfoundland and Labrador Architect (Health, Safety & Welfare - RV1817-2026)
Accreditation: AIA Registered Provider J315
Canada - Newfoundland and Labrador Engineer (General - ,)
Canada - Northwest Territories and Nunavut Engineer (General - ,)
Canada - Northwest Territory Architect / Restricted Practitioner (General - RV1817-2026)
Accreditation: AIA Registered Provider J315
Canada - Nova Scotia Architect (General - RV1817-2026)
Accreditation: AIA Registered Provider J315
Canada - Nova Scotia Engineer (General - ,)
Canada - Ontario Architect (General - RV1817-2026)
Accreditation: AIA Registered Provider J315
Canada - Ontario Engineer (General - ,)
Canada - Prince Edward Island Architect (General - RV1817-2026)
Accreditation: AIA Registered Provider J315
Canada - Prince Edward Island Engineer (General - ,)
Canada - Quebec Architect (General - RV1817-2026)
Accreditation: AIA Registered Provider J315
Canada - Quebec Engineer (General - ,)
Canada - Saskatchewan Architect (General - RV1817-2026)
Accreditation: AIA Registered Provider J315
Canada - Saskatchewan Engineer (General - ,)
Canada - Yukon Engineer (General - ,)
Green Business Certification Inc. - GBCI - LEED Accredited Professional (AP BD+C) (LEED Specific - 920030641)
Green Business Certification Inc. - GBCI - LEED Accredited Professional (AP Homes) (General - 920030641)
Green Business Certification Inc. - GBCI - LEED Accredited Professional (AP ID+C) (General - 920030641)
Green Business Certification Inc. - GBCI - LEED Accredited Professional (AP ND) (General - 920030641)
Green Business Certification Inc. - GBCI - LEED Accredited Professional (AP O+M) (General - 920030641)
Green Business Certification Inc. - GBCI - LEED Green Associate (GA) (LEED Specific - 920030641)
Green Business Certification Inc. - GBCI - WELL Accredited Professional (AP) (General - 920030641)
International Maintenance Institute - IMI - Certifications (CMT, CMP, CMM, CWWMT) (General)
International Society of Automation - ISA - Certifications (General)
National Institute for Certification in Engineering Technologies - NICET (General - ,)
Ontario Association of Certified Engineering Technicians and Technologists - OACETT - Certified Member (Contribution to Technical Knowledge)