RedVector RV-11540

2020 NEC Changes: General Requirements

2020 NEC Changes: General Requirements

1 hr. Online Course

Level: Advanced

Item#: RV-11540

SME: Vincent Della Croce

The National Electrical Code® Style Manual has been in existence since 1969 and has been updated nine times since its inception. There was quite a bit of activity in the 2020 NEC® concerning definitions. In this interactive online course, we will cover new definitions added, and existing definitions that have been revised or relocated in the 2020 NEC®. We will also review new and revised requirements for equipment installation, labeling, marking and working space.
 
Course Objectives
By the end of this course, you will be able to:
  • Explain the NEC Style Manual including the rules for definition placement
  • Discuss new Part III of Article 100 Definitions
  • Describe the new definitions related to dormitory units, island mode, laundry area and reconditioned
  • Describe the revisions to existing definitions of accessible, available fault current, equipment grounding conductor, equipotential plane and labeled
  • Identify the revision at Section 110.5 Conductors related to copper clad aluminum, Section 110.14(D) Terminal Connection Torque, Section 110.22(A) Identification of Disconnecting Means, and Section 110.24(A) Field Marking Available Fault Current
  • Recognize the revisions to under 1000 volt working space requirements in Sections 110.26(A)(3), 110.26(C)(2) and 110.26(D) and to over 1000 volt working space requirements in Sections 110.31(A)(4) and 110.32; and
  • Explain new Section 110.12 Cables and Conductors and Section 110.21(A)(2) Reconditioned Equipment
SUBJECT MATTER EXPERT: Vincent Della Croce
Vince started his electrical career in IBEW Local Union #3, New York City, as a helper and progressed to journeyman and foreman electrician before relocating to Florida. He became licensed as a master electrician in the State of Florida in 1993 and operated a successful electrical contracting business. Vince is also licensed by the State of Florida as a residential and commercial building & electrical inspector and plans examiner. He is certified by ICC as a residential and commercial electrical inspector and plans examiner. Vince holds an Associates degree in Electronic Engineering and Electrical Maintenance Technology from Penn Foster College. Vince currently works for eti Conformity Services as a Resident Compliance Specialist. For 11 years prior to joining eti Conformity Services he was employed by the City of Port St. Lucie as a building inspector and plans examiner. During that time he also taught first year electrical apprentice class at Indian River State College. Vince is the IAEI Florida Chapter Education Chairman, an IAEI Florida Chapter Board of Director, and IAEI Southern Section Assistant Secretary Treasurer. He also sits on UL STP Panels 4 AC & MC Cable, 248 Fuses, 414 Meters, and 857 Busways. Vince is a principal member of NFPA 70 CMP 7 and alternate member of CMP 12.
State Licenses
AK - Architect (Health, Safety & Welfare - RV2497-2025)
Accreditation: AIA Registered Provider J315
AK - Electrical Administrator (National Electrical Code - 18169)
AK - Electrical Journeyman (National Electrical Code - 18169)
AK - Engineer (Health, Safety & Welfare)
AL - Architect (Health, Safety & Welfare - RV2497-2025)
Accreditation: AIA Registered Provider J315
AL - Engineer (General)
AR - Architect (Health, Safety & Welfare - RV2497-2025)
Accreditation: AIA Registered Provider J315
AR - Electrician, Journeyman and Master (National Electrical Code - 1633)
AR - Engineer (General)
CA - Electrician (General - CA Approved Continuing Education Provider)
CO - Architect (Health, Safety & Welfare - RV2497-2025)
Accreditation: AIA Registered Provider J315
CT - Architect (Health, Safety & Welfare - RV2497-2025)
Accreditation: AIA Registered Provider J315
DC - Architect (Health, Safety & Welfare - RV2497-2025)
Accreditation: AIA Registered Provider J315
DC - Engineer (General)
DE - Architect (Health, Safety & Welfare - RV2497-2025)
Accreditation: AIA Registered Provider J315
DE - Engineer (General)
FL - Architect (Health, Safety & Welfare - RV2497-2025)
Accreditation: AIA Registered Provider J315
FL - Building Code Administrator (General - 0613601)
Accreditation: FL DBPR Approved Provider 0001771
FL - Contractor, Certified (General - 0613601)
Accreditation: FL DBPR Approved Provider 0001771
FL - Contractor, Electrical (Technical - 0802356)
Accreditation: FL DBPR Approved Provider 0001771
FL - Contractor, Electrical Specialty (General - 0802356)
Accreditation: FL DBPR Approved Provider 0001771
FL - Contractor, Palm Beach County (General - 0613601)
Accreditation: FL DBPR Approved Provider 0001771
FL - Contractor, Pinellas County (General - 0613601)
Accreditation: FL DBPR Approved Provider 0001771
FL - Contractor, Registered (General - 0613601)
Accreditation: FL DBPR Approved Provider 0001771
FL - Engineer (General - 0000271)
Accreditation: FBPE Approved Provider 33
FL - Examiner (General - 0613601)
Accreditation: FL DBPR Approved Provider 0001771
FL - Inspector (General - 0613601)
Accreditation: FL DBPR Approved Provider 0001771
GA - Architect (Health, Safety & Welfare - RV2497-2025)
Accreditation: AIA Registered Provider J315
GA - Contractor, Residential and General (General)
GA - Engineer (General)
HI - Architect (Health, Safety & Welfare - RV2497-2025)
Accreditation: AIA Registered Provider J315
IA - Architect (Health, Safety & Welfare - RV2497-2025)
Accreditation: AIA Registered Provider J315
IA - Engineer (General)
ID - Architect (Health, Safety & Welfare - RV2497-2025)
Accreditation: AIA Registered Provider J315
ID - Engineer (General)
IL - Architect (Health, Safety & Welfare - RV2497-2025)
Accreditation: AIA Registered Provider J315
IL - Engineer, Professional (General)
IL - Engineer, Structural (General)
IN - Architect (Health, Safety & Welfare - RV2497-2025)
Accreditation: AIA Registered Provider J315
IN - Engineer (General - Board Approved - CE21800018)
KS - Architect (Health, Safety & Welfare - RV2497-2025)
Accreditation: AIA Registered Provider J315
KS - Engineer (Health, Safety & Welfare)
KY - Architect (Health, Safety & Welfare - RV2497-2025)
Accreditation: AIA Registered Provider J315
KY - Engineer (General)
LA - Architect (Health, Safety & Welfare - RV2497-2025)
Accreditation: AIA Registered Provider J315
LA - Engineer (General)
MA - Architect (Health, Safety & Welfare - RV2497-2025)
Accreditation: AIA Registered Provider J315
MA - Electrician (General)
MD - Architect (Health, Safety & Welfare - RV2497-2025)
Accreditation: AIA Registered Provider J315
MD - Engineer (General)
ME - Engineer (General)
MI - Architect (Health, Safety & Welfare - RV2497-2025)
Accreditation: AIA Registered Provider J315
MI - Contractor, Residential Builder and M & A (General)
MI - Engineer (General)
MN - Architect (Health, Safety & Welfare - RV2497-2025)
Accreditation: AIA Registered Provider J315
MN - Engineer (General)
MO - Architect (Health, Safety & Welfare - RV2497-2025)
Accreditation: AIA Registered Provider J315
MO - Engineer (General)
MS - Architect (Health, Safety & Welfare - RV2497-2025)
Accreditation: AIA Registered Provider J315
MS - Engineer (General)
MT - Architect (Health, Safety & Welfare - RV2497-2025)
Accreditation: AIA Registered Provider J315
MT - Engineer (General)
NC - Architect (Health, Safety & Welfare - RV2497-2025)
Accreditation: AIA Registered Provider J315
NC - Engineer (General)
ND - Engineer (Health, Safety & Welfare)
NE - Architect (Health, Safety & Welfare - RV2497-2025)
Accreditation: AIA Registered Provider J315
NE - Engineer (General)
Accreditation: Vector Solutions is authorized by IACET to offer 0.1 CEUs for this program.
NH - Architect (Health, Safety & Welfare - RV2497-2025)
Accreditation: AIA Registered Provider J315
NH - Engineer (General)
NJ - Architect (Health, Safety & Welfare - RV2497-2025)
Accreditation: AIA Registered Provider J315
NJ - Engineer (General - 24GP000006300)
NM - Architect (Health, Safety & Welfare - RV2497-2025)
Accreditation: AIA Registered Provider J315
NM - Electrician, Journeyman (National Electrical Code - 2024-144)
NM - Engineer (General)
NV - Architect (Building Code - RV2497-2025)
Accreditation: AIA Registered Provider J315
NV - Engineer (General)
NY - Architect (Health, Safety & Welfare - RV2497-2025)
Accreditation: AIA Registered Provider J315
NY - Engineer (General)
Accreditation: Vector Solutions is authorized by IACET to offer 0.1 CEU for this program.
OH - Architect (Health, Safety & Welfare - RV2497-2025)
Accreditation: AIA Registered Provider J315
OH - Engineer (General)
OK - Architect (Health, Safety & Welfare - RV2497-2025)
Accreditation: AIA Registered Provider J315
OK - Engineer (General)
OR - Architect (Health, Safety & Welfare - RV2497-2025)
Accreditation: AIA Registered Provider J315
OR - Contractor, Commercial (General)
OR - Engineer (General)
PA - Code Official,Certified (UCC) (General)
PA - Engineer (General)
PR - Architect (Health, Safety & Welfare - RV2497-2025)
Accreditation: AIA Registered Provider J315
PR - Engineer (General)
RI - Architect (Health, Safety & Welfare - RV2497-2025)
Accreditation: AIA Registered Provider J315
SC - Architect (Health, Safety & Welfare - RV2497-2025)
Accreditation: AIA Registered Provider J315
SC - Engineer (General)
SD - Architect (Health, Safety & Welfare - RV2497-2025)
Accreditation: AIA Registered Provider J315
SD - Electrician (National Electrical Code)
SD - Engineer (Technical)
TN - Architect (Health, Safety & Welfare - RV2497-2025)
Accreditation: AIA Registered Provider J315
TN - Engineer (Health, Safety & Welfare)
TX - Architect (Health, Safety & Welfare - RV2497-2025)
Accreditation: AIA Registered Provider J315
TX - Engineer (General)
UT - Architect (Health, Safety & Welfare - RV2497-2025)
Accreditation: AIA Registered Provider J315
UT - Electrician (Core - 19423)
UT - Engineer (General)
VA - Architect (General - RV2497-2025)
Accreditation: AIA Registered Provider J315
VA - Engineer (General)
VT - Architect (Health, Safety & Welfare - RV2497-2025)
Accreditation: AIA Registered Provider J315
VT - Engineer (General)
WA - Architect (Health, Safety & Welfare - RV2497-2025)
Accreditation: AIA Registered Provider J315
WI - Architect (Health, Safety & Welfare - RV2497-2025)
Accreditation: AIA Registered Provider J315
WI - Engineer (General)
WV - Architect (Health, Safety & Welfare - RV2497-2025)
Accreditation: AIA Registered Provider J315
WV - Engineer (General)
WY - Architect (Health, Safety & Welfare - RV2497-2025)
Accreditation: AIA Registered Provider J315
WY - Electrician, Master and Journeyman (National Electrical Code - WY20-342C)
WY - Engineer (General)
Professional Organizations
American Academy of Environmental Engineers - AAEES - Member (General)
American Institute of Architects - AIA - Architects (Health, Safety & Welfare - RV2497-2025)
Accreditation: AIA Registered Provider J315
American Society of Civil Engineers - ASCE - Academy of Geo-Professionals (AGP) (General)
Association of Energy Engineers - AEE - Certification (Technical)
Board of Certified Safety Professionals - BCSP - Certification (General)
BOMI International - RPA, FMA and/or SMA (General)
Building Operator Certification - BOC - Certification (General)
Canada - Alberta Architect (General - RV2497-2025)
Accreditation: AIA Registered Provider J315
Canada - Alberta Engineer (General)
Canada - British Columbia Architect (AIBC) (Core - RV2497-2025)
Accreditation: AIA Registered Provider J315
Canada - British Columbia Engineer (General)
Canada - Manitoba Architect (General - RV2497-2025)
Accreditation: AIA Registered Provider J315
Canada - Manitoba Engineer (General)
Canada - New Brunswick Architect (General - RV2497-2025)
Accreditation: AIA Registered Provider J315
Canada - New Brunswick Engineer (General)
Canada - Newfoundland and Labrador Architect (Health, Safety & Welfare - RV2497-2025)
Accreditation: AIA Registered Provider J315
Canada - Newfoundland and Labrador Engineer (General)
Canada - Northwest Territories and Nunavut Engineer (General)
Canada - Northwest Territory Architect / Restricted Practitioner (General - RV2497-2025)
Accreditation: AIA Registered Provider J315
Canada - Nova Scotia Architect (General - RV2497-2025)
Accreditation: AIA Registered Provider J315
Canada - Nova Scotia Engineer (General)
Canada - Ontario Architect (General - RV2497-2025)
Accreditation: AIA Registered Provider J315
Canada - Ontario Engineer (General)
Canada - Prince Edward Island Architect (General - RV2497-2025)
Accreditation: AIA Registered Provider J315
Canada - Prince Edward Island Engineer (General)
Canada - Quebec Architect (General - RV2497-2025)
Accreditation: AIA Registered Provider J315
Canada - Quebec Engineer (General)
Canada - Saskatchewan Architect (General - RV2497-2025)
Accreditation: AIA Registered Provider J315
Canada - Saskatchewan Engineer (General)
Canada - Yukon Engineer (General)
Canadian Registered Safety Professionals - CRSP (Safety)
International Code Council - ICC - Member (General - Board Approved - 32013)
Accreditation: International Code Council Preferred Provider 1156
International Facility Management Association - IFMA - Certified Facility Manager (CFM) (General)
International Maintenance Institute - IMI - Certifications (CMT, CMP, CMM, CWWMT) (General)
National Institute for Certification in Engineering Technologies - NICET (General)