RedVector RV-10386

Design of Reinforced Concrete Using the ACI Code: Flexural Analysis of Beams

Design of Reinforced Concrete Using the ACI Code: Flexural Analysis of Beams

1 hr. Online Course

Level: Advanced

Item#: RV-10386

SME: Jack C. McCormac Russell H. Brown

This course has been discontinued.

 
 
In this course you will learn the three progressive stages that occur before a beam collapses and how to calculate the stress of concrete beams at the different stages. In this course, we will cover formulas you can use to calculate a beam’s stress, both in concrete and steel, and when those formulas should be used. We will be utilizing examples to enhance your understanding of each formula’s use and what is occurring at each stage.
 
Posted by arrangement with John Wiley & Sons, Inc. Copyright © 2014, 2009, 2006, 2005 All rights reserved.
Course Objectives
By the end of this course, you will be able to:
  • List the three stages that occur before a beam collapses and explain what occurs to the beam at each stage.
  • Provide the allowable standard values for concrete stress and reinforcing steel stress as dictated by the ACI.
  • Select the correct formula(s) that can be used in each stage to calculate the flexibility of a beam.
  • Calculate the bending stress of an uncracked, cracked beam, and a double-reinforced beam provided with at least the concrete’s compression strength, bending moment, modulus rupture and/or the modular ratio.
  • Define a transformed area and explain how it can be used to calculate the bending stresses in a beam.
  • Calculate the correct nominal or theoretical moment strength of a beam provided with the concrete’s yield stress and compression strength.
State Licenses
FL - Contractor, Certified (General - 0610937)
Accreditation: FL DBPR Approved Provider 0001771
FL - Contractor, Palm Beach County (General - 0610937)
Accreditation: FL DBPR Approved Provider 0001771
FL - Contractor, Pinellas County (General - 0610937)
Accreditation: FL DBPR Approved Provider 0001771
FL - Contractor, Registered (General - 0610937)
Accreditation: FL DBPR Approved Provider 0001771
NE - Architect (Health, Safety & Welfare)
Accreditation: Vector Solutions is authorized by IACET to offer 0.10 CEUs for this program
NE - Engineer (General)
Accreditation: Vector Solutions is authorized by IACET to offer 0.10 CEUs for this program
NJ - Engineer (General - 24GP000006300)
NY - Engineer (General)
Accreditation: Vector Solutions is authorized by IACET to offer 0.1 CEU for this program.
PA - Code Official,Certified (UCC) (General)