RedVector RV-10695AW

Seismic - Wood Diaphragm Design for Out of Plane Wall Anchorage

Seismic - Wood Diaphragm Design for Out of Plane Wall Anchorage

1 hr. Online Course

Level: Intermediate

Item#: RV-10695AW

SME: Jill Nelson, PE, SE, LEED AP BD+C

This course has been discontinued.

 
 
This course will explain the design and detailing of subdiaphragms for a flexible roof system using ASCE 7-10 Section 12.11 Structural Walls and Their Anchorage. Many low rise buildings are constructed with heavy walls of masonry or concrete and light wood roofs or floors. During an earthquake the light roof framing must stabilize the heavy walls as those walls move out of plane. IBC 2012 and ASCE 7-10 require that the roofs and floors be designed to transfer the out of plane wall forces through the diaphragm using the subdiaphragm concept. This course will show you how to develop the demand on the diaphragm, calculate the capacity of the framing members and detail the members to achieve this load transfer.
Course Objectives
At the end of this course, you will be able to:
  • Identify the generation of the seismic inertia forces for heavy walls supported by flexible diaphragms
  • Calculate seismic out-of-plane wall forces
  • Apply the subdiaphragm concept to distribute those forces through the flexible diaphragm
  • Evaluate alternatives to create the best layout
  • Review possible code modifications to better address the issue
SUBJECT MATTER EXPERT: Jill Nelson, PE, SE, LEED AP BD+C
Jill Nelson, PE, SE, LEED AP BD+C Photo
Jill Nelson is a registered Civil and Structural Engineer in California and Washington. She earned a Bachelor of Science in Civil Engineering from the University of Nevada, Reno and a Master of Science in Engineering from the University of Washington with an emphasis in Structural Engineering. With over 20 years of experience, she is an accomplished designer of low and mid-rise building constructed of wood, steel and concrete. Through the years her areas of interest has increased to include both new construction and renovation of existing buildings with a focus on seismic rehabilitation. Ms. Nelson is currently an Associate Professor in the Architectural Engineering Department at California Polytechnic State University, San Luis Obispo.
State Licenses
AK - Architect (General - RV1802-2026)
Accreditation: AIA Registered Provider J315
AL - Architect (Health, Safety & Welfare - RV1802-2026)
Accreditation: AIA Registered Provider J315
AR - Architect (Health, Safety & Welfare - RV1802-2026)
Accreditation: AIA Registered Provider J315
CO - Architect (Health, Safety & Welfare - RV1802-2026)
Accreditation: AIA Registered Provider J315
CT - Architect (Health, Safety & Welfare - RV1802-2026)
Accreditation: AIA Registered Provider J315
DC - Architect (Health, Safety & Welfare - RV1802-2026)
Accreditation: AIA Registered Provider J315
DE - Architect (Health, Safety & Welfare - RV1802-2026)
Accreditation: AIA Registered Provider J315
FL - Architect (Health, Safety & Welfare - RV1802-2026)
Accreditation: AIA Registered Provider J315
GA - Architect (Health, Safety & Welfare - RV1802-2026)
Accreditation: AIA Registered Provider J315
HI - Architect (Health, Safety & Welfare - RV1802-2026)
Accreditation: AIA Registered Provider J315
IA - Architect (Health, Safety & Welfare - RV1802-2026)
Accreditation: AIA Registered Provider J315
ID - Architect (Health, Safety & Welfare - RV1802-2026)
Accreditation: AIA Registered Provider J315
IL - Architect (Health, Safety & Welfare - RV1802-2026)
Accreditation: AIA Registered Provider J315
IN - Architect (Health, Safety & Welfare - RV1802-2026)
Accreditation: AIA Registered Provider J315
KS - Architect (Health, Safety & Welfare - RV1802-2026)
Accreditation: AIA Registered Provider J315
KY - Architect (Health, Safety & Welfare - RV1802-2026)
Accreditation: AIA Registered Provider J315
LA - Architect (Health, Safety & Welfare - RV1802-2026)
Accreditation: AIA Registered Provider J315
MA - Architect (Health, Safety & Welfare - RV1802-2026)
Accreditation: AIA Registered Provider J315
MD - Architect (Health, Safety & Welfare - RV1802-2026)
Accreditation: AIA Registered Provider J315
MI - Architect (Health, Safety & Welfare - RV1802-2026)
Accreditation: AIA Registered Provider J315
MN - Architect (Health, Safety & Welfare - RV1802-2026)
Accreditation: AIA Registered Provider J315
MO - Architect (Health, Safety & Welfare - RV1802-2026)
Accreditation: AIA Registered Provider J315
MS - Architect (Health, Safety & Welfare - RV1802-2026)
Accreditation: AIA Registered Provider J315
MT - Architect (Health, Safety & Welfare - RV1802-2026)
Accreditation: AIA Registered Provider J315
NC - Architect (Health, Safety & Welfare - RV1802-2026)
Accreditation: AIA Registered Provider J315
NE - Architect (Health, Safety & Welfare)
Accreditation: Vector Solutions is authorized by IACET to offer 0.10 CEUs for this program
NE - Architect (Health, Safety & Welfare - RV1802-2026)
Accreditation: AIA Registered Provider J315
NE - Engineer (General)
Accreditation: Vector Solutions is authorized by IACET to offer 0.10 CEUs for this program
NH - Architect (Health, Safety & Welfare - RV1802-2026)
Accreditation: AIA Registered Provider J315
NJ - Architect (Health, Safety & Welfare - RV1802-2026)
Accreditation: AIA Registered Provider J315
NJ - Engineer (General - 24GP000006300)
NM - Architect (Health, Safety & Welfare - RV1802-2026)
Accreditation: AIA Registered Provider J315
NV - Architect (Health, Safety & Welfare - RV1802-2026)
Accreditation: AIA Registered Provider J315
NY - Architect (Health, Safety & Welfare - RV1802-2026)
Accreditation: AIA Registered Provider J315
NY - Engineer (General)
Accreditation: Vector Solutions is authorized by IACET to offer 0.1 CEU for this program.
OH - Architect (Health, Safety & Welfare - RV1802-2026)
Accreditation: AIA Registered Provider J315
OK - Architect (Health, Safety & Welfare - RV1802-2026)
Accreditation: AIA Registered Provider J315
OR - Architect (Health, Safety & Welfare - RV1802-2026)
Accreditation: AIA Registered Provider J315
PR - Architect (Health, Safety & Welfare - RV1802-2026)
Accreditation: AIA Registered Provider J315
RI - Architect (Health, Safety & Welfare - RV1802-2026)
Accreditation: AIA Registered Provider J315
SC - Architect (Health, Safety & Welfare - RV1802-2026)
Accreditation: AIA Registered Provider J315
SD - Architect (Health, Safety & Welfare - RV1802-2026)
Accreditation: AIA Registered Provider J315
TN - Architect (Health, Safety & Welfare - RV1802-2026)
Accreditation: AIA Registered Provider J315
TX - Architect (Health, Safety & Welfare - RV1802-2026)
Accreditation: AIA Registered Provider J315
UT - Architect (Health, Safety & Welfare - RV1802-2026)
Accreditation: AIA Registered Provider J315
VA - Architect (General - RV1802-2026)
Accreditation: AIA Registered Provider J315
VT - Architect (Health, Safety & Welfare - RV1802-2026)
Accreditation: AIA Registered Provider J315
WA - Architect (Health, Safety & Welfare - RV1802-2026)
Accreditation: AIA Registered Provider J315
WI - Architect (Health, Safety & Welfare - RV1802-2026)
Accreditation: AIA Registered Provider J315
WV - Architect (Health, Safety & Welfare - RV1802-2026)
Accreditation: AIA Registered Provider J315
WY - Architect (Health, Safety & Welfare - RV1802-2026)
Accreditation: AIA Registered Provider J315
Professional Organizations
American Institute of Architects - AIA - Architects (Health, Safety & Welfare - RV1802-2026)
Accreditation: AIA Registered Provider J315
Canada - Alberta Architect (General - RV1802-2026)
Accreditation: AIA Registered Provider J315
Canada - British Columbia Architect (AIBC) (Core - RV1802-2026)
Accreditation: AIA Registered Provider J315
Canada - Manitoba Architect (General - RV1802-2026)
Accreditation: AIA Registered Provider J315
Canada - New Brunswick Architect (General - RV1802-2026)
Accreditation: AIA Registered Provider J315
Canada - Newfoundland and Labrador Architect (Health, Safety & Welfare - RV1802-2026)
Accreditation: AIA Registered Provider J315
Canada - Northwest Territory Architect / Restricted Practitioner (General - RV1802-2026)
Accreditation: AIA Registered Provider J315
Canada - Nova Scotia Architect (General - RV1802-2026)
Accreditation: AIA Registered Provider J315
Canada - Ontario Architect (General - RV1802-2026)
Accreditation: AIA Registered Provider J315
Canada - Prince Edward Island Architect (General - RV1802-2026)
Accreditation: AIA Registered Provider J315
Canada - Quebec Architect (General - RV1802-2026)
Accreditation: AIA Registered Provider J315
Canada - Saskatchewan Architect (General - RV1802-2026)
Accreditation: AIA Registered Provider J315