RedVector RV-10794AW

Design of Buildings for Coastal Flooding

Design of Buildings for Coastal Flooding

2 hrs. Online Course

Level: Advanced

Item#: RV-10794AW

SME: William Coulbourne, P.E., F. ASCE, F. SEI

This course has been discontinued.

This course provides information important to the design of foundations used in coastal areas. The design methodology comes from FEMA's Coastal Construction Manual (CCM) and has been developed from studying failures after numerous coastal storms. Flood loads are developed using both ASCE 7 and the CCM and applied to pile supported structures. Other flood effects such as erosion and scour are covered. Pile design is discussed as well as bracing methods used in pile systems. An example of how to calculate flood loads and how to apply them to the foundation at a coastal location is included to help provide context on the method and magnitude of the loads.
Course Objectives
By the end of this course, you will be able to:
  • Apply the flood load provisions in ASCE 7-10 and ASCE 24 to properly design pile foundations that are safe for its occupants.
  • Learn about proposed changes to ASCE 7-10 and ASCE 24 that will affect the safety of the public.
  • Identify the best practice design and construction standards for pile foundation design in coastal areas that will provide the most safety and building resiliency to the public.
  • Recognize the limitations for the solutions in foundation design in order to assist in identifying issues that require more thorough or unique analysis.
  • State the current design methodologies for pile foundations and any limitations there are on the use of these systems.
SUBJECT MATTER EXPERT: William Coulbourne, P.E., F. ASCE, F. SEI
William Coulbourne, P.E., F. ASCE, F. SEI Photo
Mr. Coulbourne has a BS in Civil Engineering from Virginia Tech and a Masters in Structural Engineering from the University of Virginia. He is a licensed Professional Engineer in three states. He is a national expert in wind and flood mitigation and has been involved in FEMA Mitigation Assessment Teams and natural hazard damage assessments for 20 years. He has been involved as an investigator or Project Manager with every major hurricane, tornado and flood since 1995, and was involved in a building collapse caused by terrorism and a tsunami in Japan. He has investigated failures and mitigation design techniques for thousands of buildings including residential structures, schools used as shelters, hospitals, and other critical facilities. He holds Certifications in Structural Engineering and Building Inspection Engineering.

Mr. Coulbourne has written articles for journals and given presentations, seminars and webinars for homebuilders, engineers, architects, building officials and homeowners on high wind and flood design and coastal construction issues and has taught as an Adjunct Faculty member in the College of Engineering at the University of Delaware. He was the primary author and Project Manager for FEMA 55: Coastal Construction Manual. He has co-authored books and journal articles on high wind design issues and strategies including Guides to the Wind Load Provisions of ASCE 7-05 and ASCE 7-10, an ATC Design Guide on Basic Wind Engineering for Low-Rise Buildings and a book on Engineering Investigations of Hurricane Damage for ASCE. He is a Fellow of the American Society of Civil Engineers (ASCE) and a Fellow in the Structural Engineering Institute of ASCE. He actively participates on the ASCE engineering standards committees for ASCE 7 Minimum Design Loads for Buildings and Other Structures, ASCE 24 Flood Resistant Design and Construction, and a new standards committee for improving tornado wind speeds using the EF Scale.
 
Mr. Coulbourne is a member of the Florida International Wall of Wind Technical Advisory Panel, a member of an Expert Panel for the Texas Department of Insurance investigating methods for determining hurricane damage caused by wind and water, a member of ABET’s Engineering Accreditation Commission Executive Committee, a Board Member of the American Association of Wind Engineering, and a newly elected member into the Academy of Distinguished Alumni of the Via Department of Civil Engineering at Virginia Tech.
State Licenses
AK - Engineer (Health, Safety & Welfare - ,)
AL - Engineer (General - ,)
AR - Engineer (General - ,)
DC - Engineer (General - CE21800018)
DE - Engineer (General - ,)
FL - Building Code Administrator (General - 5007889)
Accreditation: FL DBPR Approved Provider 0001771
FL - Engineer (General - 0000272)
Accreditation: FBPE Approved Provider 33
FL - Examiner (General - 5007889)
Accreditation: FL DBPR Approved Provider 0001771
FL - Inspector (General - 5007889)
Accreditation: FL DBPR Approved Provider 0001771
GA - Engineer (General - ,)
IA - Engineer (General - ,)
ID - Engineer (General - ,)
IL - Engineer, Professional (General - ,)
IL - Engineer, Structural (General - ,)
IN - Engineer (General - Board Approved - CE21800018)
KS - Engineer (Health, Safety & Welfare - ,)
KY - Engineer (General - ,)
LA - Engineer (General - ,)
MD - Engineer (General - ,)
ME - Engineer (General - ,)
MI - Engineer (General - ,)
MN - Engineer (General - ,)
MO - Engineer (General - ,)
MS - Engineer (General - ,)
MT - Engineer (General - ,)
NC - Engineer (General - ,)
ND - Engineer (Health, Safety & Welfare - ,)
NE - Architect (General, Health, Safety & Welfare)
Accreditation: Vector Solutions is authorized by IACET to offer 0.20 CEUs for this program
NE - Engineer (General)
Accreditation: Vector Solutions is authorized by IACET to offer 0.20 CEUs for this program
NH - Engineer (General - ,)
NJ - Engineer (General - 24GP000006300)
NM - Engineer (General - ,)
NV - Engineer (General - ,)
NY - Engineer (General)
Accreditation: Vector Solutions is authorized by IACET to offer 0.2 CEU for this program.
OH - Engineer (General - ,)
OK - Engineer (General - ,)
OR - Engineer (General - ,)
PA - Engineer (General - ,)
PR - Engineer (General - ,)
SC - Engineer (General - ,)
SD - Engineer (Technical - ,)
TN - Engineer (Health, Safety & Welfare - ,)
TX - Engineer (General - ,)
UT - Engineer (General - ,)
VA - Engineer (General - ,)
VT - Engineer (General - ,)
WI - Engineer (General - ,)
WV - Engineer (General - ,)
WY - Engineer (General - ,)
Professional Organizations
American Academy of Environmental Engineers - AAEES - Member (General - ,)
American Society of Civil Engineers - ASCE - Academy of Coastal, Ocean, Port & Navigation Engineers (ACOPNE) (General)
American Society of Civil Engineers - ASCE - Academy of Geo-Professionals (AGP) (General)
American Society of Civil Engineers - ASCE - American Academy of Water Resources Engineer (AAWRE) (General)
Association of State Floodplain Managers - ASFPM - Certified Floodplain Manager (Core)
Canada - Alberta Engineer (General - ,)
Canada - British Columbia Engineer (General - ,)
Canada - Manitoba Engineer (General - ,)
Canada - New Brunswick Engineer (General - ,)
Canada - Newfoundland and Labrador Engineer (General - ,)
Canada - Northwest Territories and Nunavut Engineer (General - ,)
Canada - Nova Scotia Engineer (General - ,)
Canada - Ontario Engineer (General - ,)
Canada - Prince Edward Island Engineer (General - ,)
Canada - Quebec Engineer (General - ,)
Canada - Saskatchewan Engineer (General - ,)
Canada - Yukon Engineer (General - ,)
International Society of Automation - ISA - Certifications (General)
National Institute for Certification in Engineering Technologies - NICET (General - ,)
Ontario Association of Certified Engineering Technicians and Technologists - OACETT - Certified Member (Contribution to Technical Knowledge)