Introduction to Sustainable Design and Construction Using Green Globes

$29.95

add to cart Get More With a Subscription! Request a Demo For Your Company

This course has been discontinued.

What’s the oldest sustainability rating system for buildings? It isn’t LEED*! The roots of Green Globes go back before 1990 to the Building Research Establishment Environmental Assessment Method (BREEAM) developed in the United Kingdom. From there it expanded to Canada and thence to the U.S. It offers an online alternative and perhaps less expensive way to a certified sustainable building. This course provides an introduction to sustainable building design and construction and to the Green Globes system. It compares Green Globes and the U.S. GBC’s LEED rating system. It also describes the path for professionals to become trained assessors.

*LEED is an acronym for Leadership in Energy and Environmental Design and is a registered trademark of the U.S. Green Building Council (USGBC).

Objectives SME Course Applies to

Course Objectives

At the end of this course, you will be able to:

Recognize our need for sustainable buildings for long-term welfare
Discuss sustainable building design and construction and it’s health and safety benefits
Identify the connections between building design decisions, sustainable built environments, the climate, health, economics, energy, safety and societal well-being
Describe the Green Globes rating system
Compare the Green Globes and the LEED rating systems
Define the process of becoming a Green Globes Professional or Assessor

SUBJECT MATTER EXPERT: Richard Kelso

University of Tennessee
College of Architecture and Design
Professor
P.E., NCEE, Ph.D.

Dick was born in Knoxville, graduated from UT with a BSME and began work with Trane in Chattanooga in 1960. He joined Geo. S. Campbell & Associates in 1968 and earned an MSME from UT in 1971. He became Facilities Planning Engineer for UT in 1971 and joined the faculty of the College of Architecture in 1976, where he is currently a Professor.

He started a consulting engineering practice in 1974, and after joining forces with John Regen, it became Kelso-Regen Associates in 1989. Over the course of 26 years of managing this practice the firm handled over 2000 building projects across the country. He retired at the end of 2000 but the firm continues.

Dick continues to teach and do research, and received a PhD from Loughborough University (UK) in 2003. He has been active in ASHRAE at the local, regional and society levels, and has been honored with the rank of Fellow and the Distinguished Service Award. He is in the first year of a three year term on the ASHRAE Board of Directors.

He and his wife Sarah have three children and five grandchildren, of whom he is very proud.

State Licenses

Alaska

AK - Engineer (Health, Safety & Welfare - ,)

Alabama

AL - Engineer (General - ,)

Arkansas

AR - Engineer (General - ,)

Delaware

DE - Engineer (General - ,)

Florida

FL - Engineer (General - 0000271)

Accreditation: FBPE Approved Provider 33

FL - Interior Designer (General - RV1807-2026)

Accreditation: AIA Registered Provider J315

FL - Landscape Architect (Optional - 0010145)

Accreditation: FL DBPR Approved Provider 0001771

Georgia

GA - Architect (General - RV1807-2026)

Accreditation: AIA Registered Provider J315

GA - Engineer (General - ,)

Iowa

IA - Engineer (General - ,)

Idaho

ID - Engineer (General - ,)

Illinois

IL - Architect (General - RV1807-2026)

Accreditation: AIA Registered Provider J315

IL - Engineer, Professional (General - ,)

IL - Engineer, Structural (General - ,)

Indiana

IN - Architect (General - RV1807-2026)

Accreditation: AIA Registered Provider J315

Kansas

KS - Architect (General - RV1807-2026)

Accreditation: AIA Registered Provider J315

KS - Engineer (Health, Safety & Welfare - ,)

Kentucky

KY - Engineer (General - ,)

Louisiana

LA - Engineer (General - ,)

Massachusetts

MA - Construction Supervisor (Energy - CS-9516)

Accreditation: Coordinator: Michael Ojdana ID # CS-CD-000181 If you have any comments about this course offering, please mail them to the Board of Building Regulations and Standards ATTN: Education/ 1000 Washington St. suite 710 / Boston, MA 02137

Maryland

MD - Engineer (General - ,)

Maine

ME - Engineer (General - ,)

Michigan

MI - Engineer (General - ,)

Minnesota

MN - Engineer (General - ,)

Missouri

MO - Architect (General - RV1807-2026)

Accreditation: AIA Registered Provider J315

MO - Engineer (General - ,)

Mississippi

MS - Engineer (General - ,)

Montana

MT - Engineer (General - ,)

North Carolina

NC - Engineer (General - ,)

NC - Landscape Architect (Health, Safety & Welfare - 12450)

North Dakota

ND - Engineer (Health, Safety & Welfare - ,)

Nebraska

NE - Architect (General, Health, Safety & Welfare)

Accreditation: Vector Solutions is authorized by IACET to offer 0.10 CEUs for this program

NE - Architect (General, Health, Safety & Welfare - RV1807-2026)

Accreditation: AIA Registered Provider J315

NE - Engineer (General)

Accreditation: Vector Solutions is authorized by IACET to offer 0.10 CEUs for this program

New Hampshire

NH - Engineer (General - ,)

New Jersey

NJ - Architect (General - RV1807-2026)

Accreditation: AIA Registered Provider J315

NJ - Engineer (General - 24GP000006300)

New Mexico

NM - Engineer (General - ,)

Nevada

NV - Engineer (General - ,)

New York

NY - Architect (General - RV1807-2026)

Accreditation: AIA Registered Provider J315

NY - Engineer (General)

Accreditation: Vector Solutions is authorized by IACET to offer 0.1 CEU for this program.

Ohio

OH - Engineer (General - ,)

Oklahoma

OK - Engineer (General - ,)

Oregon

OR - Engineer (General - ,)

Pennsylvania

PA - Code Official,Certified (UCC) (General)

PA - Engineer (General - ,)

Puerto Rico

PR - Engineer (General - ,)

South Carolina

SC - Engineer (General - ,)

South Dakota

SD - Architect (General - RV1807-2026)

Accreditation: AIA Registered Provider J315

SD - Engineer (Technical - ,)

Tennessee

TN - Architect (General - RV1807-2026)

Accreditation: AIA Registered Provider J315

TN - Engineer (Health, Safety & Welfare - ,)

Texas

TX - Engineer (General - ,)

Utah

UT - Engineer (General - ,)

Virginia

VA - Architect (General - RV1807-2026)

Accreditation: AIA Registered Provider J315

VA - Engineer (General - ,)

Vermont

VT - Engineer (General - ,)

Washington

WA - Architect (General - RV1807-2026)

Accreditation: AIA Registered Provider J315

Wisconsin

WI - Architect (General - RV1807-2026)

Accreditation: AIA Registered Provider J315

WI - Engineer (General - ,)

West Virginia

WV - Engineer (General - ,)

Wyoming

WY - Engineer (General - ,)

Professional Organizations

American Academy of Environmental Engineers - AAEES - Member (General - ,)

American Institute of Architects - AIA - Architects (General - RV1807-2026)

Accreditation: AIA Registered Provider J315

American Institute of Certified Planners/American Planning Association - AICP - Certified Planners (General - 9277611)

American Society of Civil Engineers - ASCE - Academy of Coastal, Ocean, Port & Navigation Engineers (ACOPNE) (General, Sustainable Design / Energy-Efficient Design)

American Society of Civil Engineers - ASCE - American Academy of Water Resources Engineer (AAWRE) (General, Sustainable Design / Energy-Efficient Design)

BOMI International - RPA, FMA and/or SMA (General)

Building Operator Certification - BOC - Certification (General)

Canada - Alberta Architect (General - RV1807-2026)

Accreditation: AIA Registered Provider J315

Canada - Alberta Engineer (General - ,)

Canada - British Columbia Architect (AIBC) (General - RV1807-2026)

Accreditation: AIA Registered Provider J315

Canada - British Columbia Engineer (General - ,)

Canada - Manitoba Architect (General - RV1807-2026)

Accreditation: AIA Registered Provider J315

Canada - Manitoba Engineer (General - ,)

Canada - New Brunswick Architect (General - RV1807-2026)

Accreditation: AIA Registered Provider J315

Canada - New Brunswick Engineer (General - ,)

Canada - Newfoundland and Labrador Engineer (General - ,)

Canada - Northwest Territories and Nunavut Engineer (General - ,)

Canada - Northwest Territory Architect / Restricted Practitioner (General - RV1807-2026)

Accreditation: AIA Registered Provider J315

Canada - Nova Scotia Architect (General - RV1807-2026)

Accreditation: AIA Registered Provider J315

Canada - Nova Scotia Engineer (General - ,)

Canada - Ontario Architect (General - RV1807-2026)

Accreditation: AIA Registered Provider J315

Canada - Ontario Engineer (General - ,)

Canada - Prince Edward Island Architect (General - RV1807-2026)

Accreditation: AIA Registered Provider J315

Canada - Prince Edward Island Engineer (General - ,)

Canada - Quebec Architect (General - RV1807-2026)

Accreditation: AIA Registered Provider J315

Canada - Quebec Engineer (General - ,)

Canada - Saskatchewan Architect (General - RV1807-2026)

Accreditation: AIA Registered Provider J315

Canada - Saskatchewan Engineer (General - ,)

Canada - Yukon Engineer (General - ,)

Green Business Certification Inc. - GBCI - LEED Accredited Professional (AP BD+C) (General - 0920002367)

Green Business Certification Inc. - GBCI - LEED Accredited Professional (AP Homes) (General - 0920002367)

Green Business Certification Inc. - GBCI - LEED Accredited Professional (AP ID+C) (General - 0920002367)

Green Business Certification Inc. - GBCI - LEED Accredited Professional (AP ND) (General - 0920002367)

Green Business Certification Inc. - GBCI - LEED Accredited Professional (AP O+M) (General - 0920002367)

Green Business Certification Inc. - GBCI - LEED Green Associate (GA) (General - 0920002367)

Green Business Certification Inc. - GBCI - WELL Accredited Professional (AP) (General - 0920002367)

National Institute for Certification in Engineering Technologies - NICET (General - ,)

Ontario Association of Certified Engineering Technicians and Technologists - OACETT - Certified Member (Contribution to Technical Knowledge)