RedVector RV-10572AW

Work Practices of the Mold Remediation Contractor

Work Practices of the Mold Remediation Contractor

1 hr. Online Course

Level: Fundamental

Item#: RV-10572AW

SME: Michael A. Pinto, CSP, CMP

Work practices of the mold remediation contractor are the everyday hands-on methods that ultimately make a project succeed or fail. This course will provide the keys to assessing mold contaminated materials and contents, and assist the remediation professional in the decision making of whether they should be disposed or cleaned, and how to effectively clean them.
Course Objectives
At the conclusion of this course, you will be able to:
  • Name the typical project sequence that ensures efficient remediation and the best chance for passing the clearance criteria
  • Implement the best procedures available to clean contamination from a variety of material types
  • Know when to anticipate problems in unseen areas and how to minimize their impact 
  • Select appropriate waste management precautions to take inside and outside of the work area
SUBJECT MATTER EXPERT: Michael A. Pinto, CSP, CMP
Michael A. Pinto, CSP, CMP Photo
Michael A. Pinto, CSP, CMP, is chief executive officer of Wonder Makers Environmental, Inc., a manufacturing and environmental consulting firm that specializes in identification and control of asbestos, lead, IAQ, mold, industrial hygiene, and chemical problems. Mr. Pinto is the author of over 150 published articles and several books including, Fungal Contamination: A Comprehensive Guide for Remediation. He completed doctoral course work in environmental engineering and holds numerous certifications in the environmental and safety areas including Certified Safety Professional and Certified Mold Professional. He was selected as part of the Mitigation Assessment Team for FEMA following Hurricanes Katrina and Rita. He was the lead author on the FEMA Fact Sheet Cleaning Flooded Buildings after Hurricane Sandy and was a contributor to the EPA’s Healthy Homes Initiative. He was a contributor to the section of the A.M. Best Underwriting Guide related to mold remediation and restoration contractors.
State Licenses
AK - Engineer (Health, Safety & Welfare - ,)
AL - Engineer (General - ,)
AR - Engineer (General - ,)
DE - Engineer (General - ,)
FL - Building Code Administrator (General - 0610881)
Accreditation: FL DBPR Approved Provider 0001771
FL - Contractor, Certified (General - 0610881)
Accreditation: FL DBPR Approved Provider 0001771
FL - Contractor, Palm Beach County (General - 0610881)
Accreditation: FL DBPR Approved Provider 0001771
FL - Contractor, Pinellas County (General - 0610881)
Accreditation: FL DBPR Approved Provider 0001771
FL - Contractor, Registered (General - 0610881)
Accreditation: FL DBPR Approved Provider 0001771
FL - Engineer (General - 0000271)
Accreditation: FBPE Approved Provider 33
FL - Examiner (General - 0610881)
Accreditation: FL DBPR Approved Provider 0001771
FL - Home Inspector (General - 0000694)
Accreditation: FL DBPR Approved Provider 0001771
FL - Inspector (General - 0610881)
Accreditation: FL DBPR Approved Provider 0001771
FL - Interior Designer (General - RV1702-2026)
Accreditation: AIA Registered Provider J315
FL - Mold Assessors and Remediators (General - 0000191)
Accreditation: FL DBPR Approved Provider 0001771
GA - Architect (General - RV1702-2026)
Accreditation: AIA Registered Provider J315
GA - Engineer (General - ,)
IA - Engineer (General - ,)
ID - Engineer (General - ,)
IL - Architect (General - RV1702-2026)
Accreditation: AIA Registered Provider J315
IL - Engineer, Professional (General - ,)
IL - Engineer, Structural (General - ,)
IN - Architect (General - RV1702-2026)
Accreditation: AIA Registered Provider J315
KS - Architect (General - RV1702-2026)
Accreditation: AIA Registered Provider J315
KS - Engineer (Health, Safety & Welfare - ,)
KY - Engineer (General - ,)
LA - Engineer (General - ,)
MD - Engineer (General - ,)
ME - Engineer (General - ,)
MI - Engineer (General - ,)
MN - Engineer (General - ,)
MO - Architect (General - RV1702-2026)
Accreditation: AIA Registered Provider J315
MO - Engineer (General - ,)
MS - Engineer (General - ,)
MT - Engineer (General - ,)
NC - Engineer (General - ,)
ND - Engineer (Health, Safety & Welfare - ,)
NE - Architect (General, Health, Safety & Welfare)
Accreditation: Vector Solutions is authorized by IACET to offer 0.10 CEUs for this program
NE - Architect (General, Health, Safety & Welfare - RV1702-2026)
Accreditation: AIA Registered Provider J315
NE - Engineer (General)
Accreditation: Vector Solutions is authorized by IACET to offer 0.10 CEUs for this program
NH - Engineer (General - ,)
NJ - Architect (General - RV1702-2026)
Accreditation: AIA Registered Provider J315
NJ - Engineer (General - 24GP000006300)
NM - Engineer (General - ,)
NV - Engineer (General - ,)
NY - Architect (General - RV1702-2026)
Accreditation: AIA Registered Provider J315
NY - Engineer (General)
Accreditation: Vector Solutions is authorized by IACET to offer 0.1 CEU for this program.
OH - Engineer (General - ,)
OK - Engineer (General - ,)
OR - Engineer (General - ,)
PA - Code Official,Certified (UCC) (General)
PA - Engineer (General - ,)
PR - Engineer (General - ,)
SC - Engineer (General - ,)
SD - Architect (General - RV1702-2026)
Accreditation: AIA Registered Provider J315
SD - Engineer (Technical - ,)
TN - Architect (General - RV1702-2026)
Accreditation: AIA Registered Provider J315
TN - Engineer (Health, Safety & Welfare - ,)
TX - Engineer (General - ,)
UT - Engineer (General - ,)
VA - Architect (General - RV1702-2026)
Accreditation: AIA Registered Provider J315
VA - Engineer (General - ,)
VT - Engineer (General - ,)
WA - Architect (General - RV1702-2026)
Accreditation: AIA Registered Provider J315
WI - Architect (General - RV1702-2026)
Accreditation: AIA Registered Provider J315
WI - Engineer (General - ,)
WV - Engineer (General - ,)
WY - Engineer (General - ,)
Professional Organizations
American Academy of Environmental Engineers - AAEES - Member (General - ,)
American Council for Accredited Certification - ACAC - Member (General)
Accreditation: RedVector is an independent course provider not affiliated with the American Council for Accredited Certification (ACAC). ACAC does not develop, accredit or approve training courses, nor does it contract with course providers.
American Institute of Architects - AIA - Architects (General - RV1702-2026)
Accreditation: AIA Registered Provider J315
Canada - Alberta Architect (General - RV1702-2026)
Accreditation: AIA Registered Provider J315
Canada - Alberta Engineer (General - ,)
Canada - British Columbia - Residential Builder (General)
Canada - British Columbia Architect (AIBC) (General - RV1702-2026)
Accreditation: AIA Registered Provider J315
Canada - British Columbia Engineer (General - ,)
Canada - Manitoba Architect (General - RV1702-2026)
Accreditation: AIA Registered Provider J315
Canada - Manitoba Engineer (General - ,)
Canada - New Brunswick Architect (General - RV1702-2026)
Accreditation: AIA Registered Provider J315
Canada - New Brunswick Engineer (General - ,)
Canada - Newfoundland and Labrador Engineer (General - ,)
Canada - Northwest Territories and Nunavut Engineer (General - ,)
Canada - Northwest Territory Architect / Restricted Practitioner (General - RV1702-2026)
Accreditation: AIA Registered Provider J315
Canada - Nova Scotia Architect (General - RV1702-2026)
Accreditation: AIA Registered Provider J315
Canada - Nova Scotia Engineer (General - ,)
Canada - Ontario Architect (General - RV1702-2026)
Accreditation: AIA Registered Provider J315
Canada - Ontario Engineer (General - ,)
Canada - Prince Edward Island Architect (General - RV1702-2026)
Accreditation: AIA Registered Provider J315
Canada - Prince Edward Island Engineer (General - ,)
Canada - Quebec Architect (General - RV1702-2026)
Accreditation: AIA Registered Provider J315
Canada - Quebec Engineer (General - ,)
Canada - Saskatchewan Architect (General - RV1702-2026)
Accreditation: AIA Registered Provider J315
Canada - Saskatchewan Engineer (General - ,)
Canada - Yukon Engineer (General - ,)
National Institute for Certification in Engineering Technologies - NICET (General - ,)