RedVector RV-10576AW

Mold Documentation and Report Preparation

Mold Documentation and Report Preparation

1 hr. Online Course

Level: Fundamental

Item#: RV-10576AW

SME: Michael A. Pinto, CSP, CMP

This course has been discontinued.

 
 
This course on environmental sampling for mold examines the reasons for testing, the choices available, and the correct methods to collectively provide meaningful and accurate information to the remediation team. A combination of both science and art in the field and lab, you will learn how to sort through those sampling and analysis options and confidently describe why they are the best alternatives for each project.
Course Objectives
At the conclusion of this course, you will be able to:
  • Describe and choose from the numerous options available for air and surface field sampling.
  • List what to look for during visual assessments
  • Recognize the appropriate use and limitations of ERMI and HERTSMI-2
  • Describe the advantages and disadvantages of viable and non-viable air sampling
SUBJECT MATTER EXPERT: Michael A. Pinto, CSP, CMP
Michael A. Pinto, CSP, CMP Photo
Michael A. Pinto, CSP, CMP, is chief executive officer of Wonder Makers Environmental, Inc., a manufacturing and environmental consulting firm that specializes in identification and control of asbestos, lead, IAQ, mold, industrial hygiene, and chemical problems. Mr. Pinto is the author of over 150 published articles and several books including, Fungal Contamination: A Comprehensive Guide for Remediation. He completed doctoral course work in environmental engineering and holds numerous certifications in the environmental and safety areas including Certified Safety Professional and Certified Mold Professional. He was selected as part of the Mitigation Assessment Team for FEMA following Hurricanes Katrina and Rita. He was the lead author on the FEMA Fact Sheet Cleaning Flooded Buildings after Hurricane Sandy and was a contributor to the EPA’s Healthy Homes Initiative. He was a contributor to the section of the A.M. Best Underwriting Guide related to mold remediation and restoration contractors.
State Licenses
FL - Building Code Administrator (General - 0610877)
Accreditation: FL DBPR Approved Provider 0001771
FL - Contractor, Certified (General - 0610877)
Accreditation: FL DBPR Approved Provider 0001771
FL - Contractor, Palm Beach County (General - 0610877)
Accreditation: FL DBPR Approved Provider 0001771
FL - Contractor, Pinellas County (General - 0610877)
Accreditation: FL DBPR Approved Provider 0001771
FL - Contractor, Registered (General - 0610877)
Accreditation: FL DBPR Approved Provider 0001771
FL - Examiner (General - 0610877)
Accreditation: FL DBPR Approved Provider 0001771
FL - Home Inspector (General - 0610877)
Accreditation: FL DBPR Approved Provider 0001771
FL - Inspector (General - 0610877)
Accreditation: FL DBPR Approved Provider 0001771
FL - Interior Designer (General - RV1710-2026)
Accreditation: AIA Registered Provider J315
GA - Architect (General - RV1710-2026)
Accreditation: AIA Registered Provider J315
IL - Architect (General - RV1710-2026)
Accreditation: AIA Registered Provider J315
IN - Architect (General - RV1710-2026)
Accreditation: AIA Registered Provider J315
KS - Architect (General - RV1710-2026)
Accreditation: AIA Registered Provider J315
MO - Architect (General - RV1710-2026)
Accreditation: AIA Registered Provider J315
NE - Architect (Health, Safety & Welfare)
Accreditation: Vector Solutions is authorized by IACET to offer 0.10 CEUs for this program
NE - Engineer (General)
Accreditation: Vector Solutions is authorized by IACET to offer 0.10 CEUs for this program
NJ - Architect (General - RV1710-2026)
Accreditation: AIA Registered Provider J315
NJ - Engineer (General - 24GP000006300)
NY - Architect (General - RV1710-2026)
Accreditation: AIA Registered Provider J315
NY - Engineer (General)
Accreditation: Vector Solutions is authorized by IACET to offer 0.1 CEU for this program.
PA - Code Official,Certified (UCC) (General)
SD - Architect (General - RV1710-2026)
Accreditation: AIA Registered Provider J315
TN - Architect (General - RV1710-2026)
Accreditation: AIA Registered Provider J315
VA - Architect (General - RV1710-2026)
Accreditation: AIA Registered Provider J315
WA - Architect (General - RV1710-2026)
Accreditation: AIA Registered Provider J315
WI - Architect (General - RV1710-2026)
Accreditation: AIA Registered Provider J315
Professional Organizations
American Institute of Architects - AIA - Architects (General - RV1710-2026)
Accreditation: AIA Registered Provider J315
Canada - Alberta Architect (General - RV1710-2026)
Accreditation: AIA Registered Provider J315
Canada - British Columbia - Residential Builder (General)
Canada - British Columbia Architect (AIBC) (General - RV1710-2026)
Accreditation: AIA Registered Provider J315
Canada - Manitoba Architect (General - RV1710-2026)
Accreditation: AIA Registered Provider J315
Canada - New Brunswick Architect (General - RV1710-2026)
Accreditation: AIA Registered Provider J315
Canada - Northwest Territory Architect / Restricted Practitioner (General - RV1710-2026)
Accreditation: AIA Registered Provider J315
Canada - Nova Scotia Architect (General - RV1710-2026)
Accreditation: AIA Registered Provider J315
Canada - Ontario Architect (General - RV1710-2026)
Accreditation: AIA Registered Provider J315
Canada - Prince Edward Island Architect (General - RV1710-2026)
Accreditation: AIA Registered Provider J315
Canada - Quebec Architect (General - RV1710-2026)
Accreditation: AIA Registered Provider J315
Canada - Saskatchewan Architect (General - RV1710-2026)
Accreditation: AIA Registered Provider J315