RedVector RV-7789

Roofing Materials - Flexible Membranes

Roofing Materials - Flexible Membranes

3 hrs. Online Course

Level: Intermediate

Item#: RV-7789

SME: Mark Peterson, P.E., M.ASCE

USD$119.85 InStock 2029-01-01
add to cart Get More With a Subscription! Request a Demo For Your Company

This course has been discontinued.

 
 

Flexible membrane roofing materials are one of the more common types of roofing materials and probably the most common type for commercial structures. The materials used for membrane roofs include thermoset materials, thermoplastic materials and modified bitumen materials. This 3-hour interactive online course covers an introduction into these materials and products used with them, including fasteners, insulation materials, adhesives and fabrics. Additional RedVector.com courses are available on design considerations. This course includes a test at the end.


Vector Solutions has a long history of providing industry-specific content for its customers. While this course and its content remain accurate and functional within our systems, the look and feel may not match our more modern offerings.
Objectives SME Course Applies to
Course Objectives

Upon completion of the course, you will understand:

  • the three different groups of flexible membrane products
  • the significance of the reported physical properties of membrane materials
  • the characteristics of the major generic product types currently in use (such as EPDM, CPE and PVC)
  • how to select fasteners that will resist wind and corrosion
  • the physical and mechanical properties of insulation that affect product performance
  • the different types of insulation that are commonly used under membrane roofs
  • the various types of adhesives that are used for membrane roofs
  • the types of fabrics that are used in membrane roofs and how they are used
SUBJECT MATTER EXPERT: Mark Peterson, P.E., M.ASCE
Mark Peterson, P.E., M.ASCE Photo
Mr. Peterson has a BS and MS from Montana State University and more than 28 years of engineering experience in hydrology and hydraulics. He is currently a senior engineer with Kadrmas, Lee and Jackson and has worked extensively in both the private sector and in state government. He is licensed as a PE in MN, MT, ND, SD and WY. He was chairman of a three-person committee that re-wrote the Hydraulics Manual for the Montana Department of Transportation and authored the storm water regulations for subdivisions in Montana. He also teaches a two-day course on Introduction to Detention Pond Design for the American Society of Civil Engineers throughout the U.S.
State Licenses
Alaska
AK - Architect (Health, Safety & Welfare - RV538-2025)
Accreditation: AIA Registered Provider J315
AK - Engineer (Health, Safety & Welfare - ,)
Alabama
AL - Architect (Health, Safety & Welfare - RV538-2025)
Accreditation: AIA Registered Provider J315
AL - Engineer (General - ,)
Arkansas
AR - Architect (Health, Safety & Welfare - RV538-2025)
Accreditation: AIA Registered Provider J315
AR - Engineer (General - ,)
Colorado
CO - Architect (Health, Safety & Welfare - RV538-2025)
Accreditation: AIA Registered Provider J315
Connecticut
CT - Architect (Health, Safety & Welfare - RV538-2025)
Accreditation: AIA Registered Provider J315
District Of Columbia
DC - Architect (Health, Safety & Welfare - RV538-2025)
Accreditation: AIA Registered Provider J315
DC - Engineer (General - CE21800018)
Delaware
DE - Architect (Health, Safety & Welfare - RV538-2025)
Accreditation: AIA Registered Provider J315
DE - Engineer (General - ,)
DE - Home Inspector (General)
Accreditation: This course is approved for 3 of ASHI® Continuing Education Credits
Florida
FL - Architect (Health, Safety & Welfare - RV538-2025)
Accreditation: AIA Registered Provider J315
FL - Building Code Administrator (General - 0608480)
FL - Contractor, Certified (General - 0608480)
Accreditation: FL DBPR Approved Provider 0001771
FL - Contractor, Palm Beach County (General - 0608480)
Accreditation: FL DBPR Approved Provider 0001771
FL - Contractor, Pinellas County (General - 0608480)
Accreditation: FL DBPR Approved Provider 0001771
FL - Contractor, Registered (General - 0608480)
Accreditation: FL DBPR Approved Provider 0001771
FL - Engineer (General - 273)
Accreditation: FBPE Approved Provider 33
FL - Examiner (General - 0608480)
FL - Inspector (General - 0608480)
Georgia
GA - Architect (Health, Safety & Welfare - RV538-2025)
Accreditation: AIA Registered Provider J315
GA - Contractor, Residential and General (General)
GA - Engineer (General - ,)
Hawaii
HI - Architect (Health, Safety & Welfare - RV538-2025)
Accreditation: AIA Registered Provider J315
Iowa
IA - Architect (Health, Safety & Welfare - RV538-2025)
Accreditation: AIA Registered Provider J315
IA - Engineer (General - ,)
Idaho
ID - Architect (Health, Safety & Welfare - RV538-2025)
Accreditation: AIA Registered Provider J315
ID - Engineer (General - ,)
Illinois
IL - Architect (Health, Safety & Welfare - RV538-2025)
Accreditation: AIA Registered Provider J315
IL - Engineer, Professional (General - ,)
IL - Engineer, Structural (General - ,)
Indiana
IN - Architect (Health, Safety & Welfare - RV538-2025)
Accreditation: AIA Registered Provider J315
IN - Engineer (General - Board Approved - CE21800018)
Kansas
KS - Architect (Health, Safety & Welfare - RV538-2025)
Accreditation: AIA Registered Provider J315
KS - Engineer (Health, Safety & Welfare - ,)
Kentucky
KY - Architect (Health, Safety & Welfare - RV538-2025)
Accreditation: AIA Registered Provider J315
KY - Engineer (General - ,)
Louisiana
LA - Architect (Health, Safety & Welfare - RV538-2025)
Accreditation: AIA Registered Provider J315
LA - Contractor, Residential (General)
LA - Engineer (General - ,)
Massachusetts
MA - Architect (Health, Safety & Welfare - RV538-2025)
Accreditation: AIA Registered Provider J315
Maryland
MD - Architect (Health, Safety & Welfare - RV538-2025)
Accreditation: AIA Registered Provider J315
MD - Engineer (General - ,)
MD - Land Surveyor (General)
Maine
ME - Engineer (General - ,)
Michigan
MI - Architect (Health, Safety & Welfare - RV538-2025)
Accreditation: AIA Registered Provider J315
MI - Contractor, Residential Builder and M & A (General)
MI - Engineer (General - ,)
Minnesota
MN - Architect (Health, Safety & Welfare - RV538-2025)
Accreditation: AIA Registered Provider J315
MN - Engineer (General - ,)
Missouri
MO - Architect (Health, Safety & Welfare - RV538-2025)
Accreditation: AIA Registered Provider J315
MO - Engineer (General - ,)
Mississippi
MS - Architect (Health, Safety & Welfare - RV538-2025)
Accreditation: AIA Registered Provider J315
MS - Engineer (General - ,)
Montana
MT - Architect (Health, Safety & Welfare - RV538-2025)
Accreditation: AIA Registered Provider J315
MT - Engineer (General - ,)
North Carolina
NC - Architect (Health, Safety & Welfare - RV538-2025)
Accreditation: AIA Registered Provider J315
NC - Engineer (General - ,)
North Dakota
ND - Engineer (Health, Safety & Welfare - ,)
Nebraska
NE - Architect (General, Health, Safety & Welfare)
Accreditation: Vector Solutions is authorized by IACET to offer 0.30 CEUs for this program
NE - Engineer (General)
Accreditation: Vector Solutions is authorized by IACET to offer 0.30 CEUs for this program
New Hampshire
NH - Architect (Health, Safety & Welfare - RV538-2025)
Accreditation: AIA Registered Provider J315
NH - Engineer (General - ,)
NH - Home Inspector (General)
New Jersey
NJ - Architect (Health, Safety & Welfare - RV538-2025)
Accreditation: AIA Registered Provider J315
NJ - Engineer (General - 24GP000006300)
New Mexico
NM - Architect (Health, Safety & Welfare - RV538-2025)
Accreditation: AIA Registered Provider J315
NM - Engineer (General - ,)
Nevada
NV - Architect (Health, Safety & Welfare - RV538-2025)
Accreditation: AIA Registered Provider J315
NV - Engineer (General - ,)
New York
NY - Architect (Health, Safety & Welfare - RV538-2025)
Accreditation: AIA Registered Provider J315
NY - Engineer (General)
Accreditation: Vector Solutions is authorized by IACET to offer 0.3 CEU for this program.
Ohio
OH - Architect (Health, Safety & Welfare - RV538-2025)
Accreditation: AIA Registered Provider J315
OH - Engineer (General - ,)
Oklahoma
OK - Architect (Health, Safety & Welfare - RV538-2025)
Accreditation: AIA Registered Provider J315
OK - Engineer (General - ,)
Oregon
OR - Architect (Health, Safety & Welfare - RV538-2025)
Accreditation: AIA Registered Provider J315
OR - Contractor, Commercial (General)
OR - Engineer (General - ,)
Pennsylvania
PA - Code Official,Certified (UCC) (General)
PA - Engineer (General - ,)
PA - Land Surveyor (General)
Puerto Rico
PR - Architect (Health, Safety & Welfare - RV538-2025)
Accreditation: AIA Registered Provider J315
PR - Engineer (General - ,)
Rhode Island
RI - Architect (Health, Safety & Welfare - RV538-2025)
Accreditation: AIA Registered Provider J315
South Carolina
SC - Architect (Health, Safety & Welfare - RV538-2025)
Accreditation: AIA Registered Provider J315
SC - Engineer (General - ,)
South Dakota
SD - Architect (Health, Safety & Welfare - RV538-2025)
Accreditation: AIA Registered Provider J315
SD - Engineer (Technical - ,)
Tennessee
TN - Architect (Health, Safety & Welfare - RV538-2025)
Accreditation: AIA Registered Provider J315
TN - Engineer (Health, Safety & Welfare - ,)
Texas
TX - Architect (Health, Safety & Welfare - RV538-2025)
Accreditation: AIA Registered Provider J315
TX - Engineer (General - ,)
Utah
UT - Architect (Health, Safety & Welfare - RV538-2025)
Accreditation: AIA Registered Provider J315
UT - Engineer (General - ,)
Virginia
VA - Architect (General - RV538-2025)
Accreditation: AIA Registered Provider J315
VA - Engineer (General - ,)
Vermont
VT - Architect (Health, Safety & Welfare - RV538-2025)
Accreditation: AIA Registered Provider J315
VT - Engineer (General - ,)
Washington
WA - Architect (Health, Safety & Welfare - RV538-2025)
Accreditation: AIA Registered Provider J315
Wisconsin
WI - Architect (Health, Safety & Welfare - RV538-2025)
Accreditation: AIA Registered Provider J315
WI - Engineer (General - ,)
West Virginia
WV - Architect (Health, Safety & Welfare - RV538-2025)
Accreditation: AIA Registered Provider J315
WV - Engineer (General - ,)
Wyoming
WY - Architect (Health, Safety & Welfare - RV538-2025)
Accreditation: AIA Registered Provider J315
WY - Engineer (General - ,)
Professional Organizations
American Academy of Environmental Engineers - AAEES - Member (General - ,)
American Institute of Architects - AIA - Architects (Health, Safety & Welfare - RV538-2025)
Accreditation: AIA Registered Provider J315
American Society of Home Inspectors - ASHI (General)
Accreditation: This course is approved for 3 of ASHI® Continuing Education Credits
Canada - Alberta Architect (General - RV538-2025)
Accreditation: AIA Registered Provider J315
Canada - Alberta Engineer (General - ,)
Canada - British Columbia - Residential Builder (General)
Canada - British Columbia Architect (AIBC) (Core - RV538-2025)
Accreditation: AIA Registered Provider J315
Canada - British Columbia Engineer (General - ,)
Canada - Manitoba Architect (General - RV538-2025)
Accreditation: AIA Registered Provider J315
Canada - Manitoba Engineer (General - ,)
Canada - New Brunswick Architect (General - RV538-2025)
Accreditation: AIA Registered Provider J315
Canada - New Brunswick Engineer (General - ,)
Canada - Newfoundland and Labrador Architect (Health, Safety & Welfare - RV538-2025)
Accreditation: AIA Registered Provider J315
Canada - Newfoundland and Labrador Engineer (General - ,)
Canada - Northwest Territories and Nunavut Engineer (General - ,)
Canada - Northwest Territory Architect / Restricted Practitioner (General - RV538-2025)
Accreditation: AIA Registered Provider J315
Canada - Nova Scotia Architect (General - RV538-2025)
Accreditation: AIA Registered Provider J315
Canada - Nova Scotia Engineer (General - ,)
Canada - Ontario Architect (General - RV538-2025)
Accreditation: AIA Registered Provider J315
Canada - Ontario Engineer (General - ,)
Canada - Prince Edward Island Architect (General - RV538-2025)
Accreditation: AIA Registered Provider J315
Canada - Prince Edward Island Engineer (General - ,)
Canada - Quebec Architect (General - RV538-2025)
Accreditation: AIA Registered Provider J315
Canada - Quebec Engineer (General - ,)
Canada - Saskatchewan Architect (General - RV538-2025)
Accreditation: AIA Registered Provider J315
Canada - Saskatchewan Engineer (General - ,)
Canada - Yukon Engineer (General - ,)
National Institute for Certification in Engineering Technologies - NICET (General - ,)
Ontario Association of Certified Engineering Technicians and Technologists - OACETT - Certified Member (Contribution to Technical Knowledge)