OSHA 10 Hour Construction: Module 3B - Struck-By & Caught-Between Accidents

Request a Demo

This course has been discontinued

“Struck-by” and “caught-between” accidents are major causes of injuries and fatalities on construction worksites. Struck-by incidents are classified as accidents where workers are hit by swinging booms, falling objects (such as bricks from a scaffold), or flying objects (such as particles flying off an object being drilled or ground by a power tool). Caught-between accidents are often fatal occurrences when a worker is unwittingly caught in the gears of machinery; pinned between a vehicle and a wall, or even caught by the clothing or hair on a moving part and pulled into danger. This 1-hour interactive online course provides information to assist the learner in the identification, avoidance, and control of these hazards in the workplace. While workers may need additional training based on OSHA standards and the specific hazards of their jobs, RedVector’s Worksite Safety courses can help inject entry-level workers with critical knowledge on a variety of OSHA-regulated safety and health topics.

OSHA recommends Outreach Training Program courses as an orientation to occupational safety and health for workers. Workers must receive additional training, when required by OSHA standards, on the specific hazards of their job.

Objectives SME

Course Objectives

Lesson Objectives: Struck-By Accidents

Terminal Objective: Given current OSHA and industry information regarding construction worksite illnesses, injuries and/or fatalities, the student will be able to recognize Caught-in or -between hazards in construction.

Enabling Objectives:

Identify common caught-in or -between hazards
Describe types of caught-in or -between hazards
Protect themselves from caught-in or -between hazards
Recognize employer requirements to protect workers from caught-in or -between hazards

Lesson Objectives: Caught-In or -Between Hazards

Enabling Objectives:

Identify common caught-in or -between hazards
Describe types of caught-in or -between hazards
Protect themselves from caught-in or -between hazards
Recognize employer requirements to protect workers from caught-in or -between hazards

SUBJECT MATTER EXPERT: Dan Johnson, CSP (SFI Compliance Inc.)

Dan Johnson, CSP (SFI Compliance Inc.) Photo

Dan Johnson, CSP, is an experienced and integrity driven Environmental, Health and Safety (EHS) professional with over 20 years of accomplishments and success on a national level. He is a Certified Safety Professional with the Board of Certified Safety Professionals. Currently the Managing Partner of SFI Compliance Inc. (www.sficompliance.com), he has also been a safety director for two national home builders and a national utility contractor, as well as numerous years as a safety consultant specializing in the construction industry. He is a skillful designer of EHS programs who has effectively executed those programs within a wide range of industries. Dan has expertise in changing the work environment through behavior based safety, while maintaining productivity. His progressive leadership experiences have produced a passion for surpassing objectives and adding value to the organization. He has extensive knowledge working with multiple jurisdictions to ensure compliance, including: OSHA, DOL, DOT, EPA, USACE and some State and Local municipalities.

Dan is also the author of “Jobsite First Aid—A Field Guide for the Construction Industry” and “DeWALT Construction Safety and OSHA Handbook.”