RedVector RV-10525

The Petroleum Industry - Oil Supply

The Petroleum Industry - Oil Supply

1 hr. Online Course

Level: Fundamental

Item#: RV-10525

SME: Dr. James G. Speight C. CChem., FRSC, FCIC, FACS

In this course we will cover conventional and non-conventional oil sources, especially the impact of heavy oil and tar sand bitumen. We will also cover past and present technological, economic, and geopolitical factors of oil. These will be viewed in light of the expectance of peak oil, which is the peaking and subsequent decline of the production rate of oil, and the knowledge that oil is a limited resource.
Course Objectives
By the end of this course, you will be able to:
  • Identify conventional and nonconventional sources of oil.
  • Summarize the peak oil theory and identify the effects and consequences of peak oil.
  • Differentiate between the characteristics of tar sand bitumen versus heavy oil.
  • Recall the production process of tar sand bitumen.
SUBJECT MATTER EXPERT: Dr. James G. Speight C. CChem., FRSC, FCIC, FACS
Dr. James G. Speight C. CChem., FRSC, FCIC, FACS  Photo
Dr. James G. Speight C. CChem., FRSC, FCIC, FACS earned his B.Sc. and PhD degrees from the University of Manchester, England – he also holds a DSC in The Geological Sciences (VINIGRI, St. Petersburg, Russia) and a PhD in Petroleum Engineering, (Dubna International University, Moscow, Russia). Dr. Speight is the author of more than 50 books in petroleum science, petroleum engineering, and environmental sciences. Formerly the CEO of the Western Research Institute (now an independent consultant), he has served as Adjunct Professor in the Department of Chemical and Fuels Engineering at the University of Utah and in the Departments of Chemistry and Chemical and Petroleum Engineering at the University of Wyoming. In addition he has also been a Visiting Professor in Chemical Engineering at the following universities: the University of Missouri-Columbia, the Technical University of Denmark, and the University of Trinidad and Tobago.
Dr. Speight was elected to the Russian Academy of Sciences in 1996 and awarded the Gold Medal of Honor that same year for outstanding contributions to the field of petroleum sciences. He has also received the Scientists without Borders Medal of Honor of the Russian Academy of Sciences. In 2001, the Academy also awarded Dr. Speight the Einstein Medal for outstanding contributions and service in the field of Geological Sciences.
State Licenses
AK - Engineer (Health, Safety & Welfare - ,)
AL - Engineer (General - ,)
AL - Geologist (General)
AR - Engineer (General - ,)
DC - Engineer (General - CE21800018)
DE - Engineer (General - ,)
FL - Engineer (General - 0000271)
Accreditation: FBPE Approved Provider 33
GA - Architect (General - RV1646-2025)
Accreditation: AIA Registered Provider J315
GA - Engineer (General - ,)
IA - Engineer (General - ,)
ID - Engineer (General - ,)
IL - Architect (General - RV1646-2025)
Accreditation: AIA Registered Provider J315
IL - Engineer, Professional (General - ,)
IL - Engineer, Structural (General - ,)
IN - Architect (General - RV1646-2025)
Accreditation: AIA Registered Provider J315
IN - Engineer (General - Board Approved - CE21800018)
KS - Architect (General - RV1646-2025)
Accreditation: AIA Registered Provider J315
KS - Engineer (Health, Safety & Welfare - ,)
KS - Geologist (General)
KY - Engineer (General - ,)
LA - Engineer (General - ,)
LA - Geoscientist, Professional (Technical)
MD - Engineer (General - ,)
ME - Engineer (General - ,)
MI - Engineer (General - ,)
MN - Engineer (General - ,)
MN - Geoscientist (General)
MO - Architect (General - RV1646-2025)
Accreditation: AIA Registered Provider J315
MO - Engineer (General - ,)
MS - Engineer (General - ,)
MT - Engineer (General - ,)
NC - Engineer (General - ,)
ND - Engineer (Health, Safety & Welfare - ,)
NE - Architect (General)
Accreditation: Vector Solutions is authorized by IACET to offer 0.10 CEUs for this program
NE - Architect (General - RV1646-2025)
Accreditation: AIA Registered Provider J315
NE - Engineer (General)
Accreditation: Vector Solutions is authorized by IACET to offer 0.10 CEUs for this program
NH - Engineer (General - ,)
NH - Geologist (General)
NJ - Architect (General - RV1646-2025)
Accreditation: AIA Registered Provider J315
NJ - Engineer (General - 24GP000006300)
NM - Engineer (General - ,)
NV - Engineer (General - ,)
NY - Architect (General - RV1646-2025)
Accreditation: AIA Registered Provider J315
NY - Engineer (General)
Accreditation: Vector Solutions is authorized by IACET to offer 0.1 CEU for this program.
NY - Geologist (General)
Accreditation: Vector Solutions is authorized by IACET to offer 0.1 CEU for this program.
OH - Engineer (General - ,)
OK - Engineer (General - ,)
OR - Engineer (General - ,)
OR - Geologist (General)
PA - Engineer (General - ,)
PA - Geologist (General)
PR - Engineer (General - ,)
SC - Engineer (General - ,)
SD - Architect (General - RV1646-2025)
Accreditation: AIA Registered Provider J315
SD - Engineer (Technical - ,)
TN - Architect (General - RV1646-2025)
Accreditation: AIA Registered Provider J315
TN - Engineer (Health, Safety & Welfare - ,)
TX - Engineer (General - ,)
TX - Geoscientist (General)
UT - Engineer (General - ,)
VA - Architect (General - RV1646-2025)
Accreditation: AIA Registered Provider J315
VA - Engineer (General - ,)
VT - Engineer (General - ,)
WA - Architect (General - RV1646-2025)
Accreditation: AIA Registered Provider J315
WI - Architect (General - RV1646-2025)
Accreditation: AIA Registered Provider J315
WI - Engineer (General - ,)
WV - Engineer (General - ,)
WY - Engineer (General - ,)
Professional Organizations
American Academy of Environmental Engineers - AAEES - Member (General - ,)
American Institute of Architects - AIA - Architects (General - RV1646-2025)
Accreditation: AIA Registered Provider J315
American Institute of Professional Geologists - AIPG - Member (General)
Association of Energy Engineers - AEE - Certification (Technical)
Canada - Alberta Architect (General - RV1646-2025)
Accreditation: AIA Registered Provider J315
Canada - Alberta Engineer (General - ,)
Canada - British Columbia Architect (AIBC) (General - RV1646-2025)
Accreditation: AIA Registered Provider J315
Canada - British Columbia Engineer (General - ,)
Canada - Manitoba Architect (General - RV1646-2025)
Accreditation: AIA Registered Provider J315
Canada - Manitoba Engineer (General - ,)
Canada - New Brunswick Architect (General - RV1646-2025)
Accreditation: AIA Registered Provider J315
Canada - New Brunswick Engineer (General - ,)
Canada - Newfoundland and Labrador Engineer (General - ,)
Canada - Northwest Territories and Nunavut Engineer (General - ,)
Canada - Northwest Territory Architect / Restricted Practitioner (General - RV1646-2025)
Accreditation: AIA Registered Provider J315
Canada - Nova Scotia Architect (General - RV1646-2025)
Accreditation: AIA Registered Provider J315
Canada - Nova Scotia Engineer (General - ,)
Canada - Ontario Architect (General - RV1646-2025)
Accreditation: AIA Registered Provider J315
Canada - Ontario Engineer (General - ,)
Canada - Prince Edward Island Architect (General - RV1646-2025)
Accreditation: AIA Registered Provider J315
Canada - Prince Edward Island Engineer (General - ,)
Canada - Quebec Architect (General - RV1646-2025)
Accreditation: AIA Registered Provider J315
Canada - Quebec Engineer (General - ,)
Canada - Saskatchewan Architect (General - RV1646-2025)
Accreditation: AIA Registered Provider J315
Canada - Saskatchewan Engineer (General - ,)
Canada - Yukon Engineer (General - ,)
National Institute for Certification in Engineering Technologies - NICET (General - ,)
Ontario Association of Certified Engineering Technicians and Technologists - OACETT - Certified Member (Contribution to Technical Knowledge)