RedVector RV-10699AW

Choosing the Best Structural Lateral Force Resisting System

Choosing the Best Structural Lateral Force Resisting System

1 hr. Online Course

Level: Fundamental

Item#: RV-10699AW

SME: Jill Nelson, PE, SE, LEED AP BD+C

The decision of the lateral force resisting system for a building should be made by the structural engineer and the architect. The decision is based on a multitude of factors including structural performance, integration with architectural systems, integration with mechanical systems, constructability, and cost. This course will investigate several common lateral force resisting systems; steel moment frames, steel braced frames, wood shear walls, concrete shear walls and compare the suitability of those systems for use in low-rise buildings. Metrics will be developed to assist in the decision making process. Use of those metrics will be explored through examples.
Course Objectives
At the end of this course, you will be able to:
  • Compare the structural performance of different lateral force resisting systems
  • Compare the architectural implications in using those same systems
  • Compare the implications of constructing the different systems
  • Compare the common factors affecting the system cost
  • Develop and apply metrics to assist in decision making process
SUBJECT MATTER EXPERT: Jill Nelson, PE, SE, LEED AP BD+C
Jill Nelson, PE, SE, LEED AP BD+C Photo
Jill Nelson is a registered Civil and Structural Engineer in California and Washington. She earned a Bachelor of Science in Civil Engineering from the University of Nevada, Reno and a Master of Science in Engineering from the University of Washington with an emphasis in Structural Engineering. With over 20 years of experience, she is an accomplished designer of low and mid-rise building constructed of wood, steel and concrete. Through the years her areas of interest has increased to include both new construction and renovation of existing buildings with a focus on seismic rehabilitation. Ms. Nelson is currently an Associate Professor in the Architectural Engineering Department at California Polytechnic State University, San Luis Obispo.
State Licenses
AL - Engineer (General - ,)
AR - Engineer (General - ,)
DE - Engineer (General - ,)
FL - Contractor, Certified (General - 0611307)
Accreditation: FL DBPR Approved Provider 0001771
FL - Contractor, Miami-Dade Registered (General - D088-061)
FL - Contractor, Palm Beach County (General - 0611307)
Accreditation: FL DBPR Approved Provider 0001771
FL - Contractor, Pinellas County (General - 0611307)
Accreditation: FL DBPR Approved Provider 0001771
FL - Contractor, Registered (General - 0611307)
Accreditation: FL DBPR Approved Provider 0001771
FL - Engineer (General - 0000271)
Accreditation: FBPE Approved Provider 33
FL - Home Inspector (General - 0611307)
Accreditation: FL DBPR Approved Provider 0001771
GA - Architect (General - RV1836-2026)
Accreditation: AIA Registered Provider J315
GA - Engineer (General - ,)
IA - Engineer (General - ,)
ID - Engineer (General - ,)
IL - Architect (General - RV1836-2026)
Accreditation: AIA Registered Provider J315
IL - Engineer, Professional (General - ,)
IL - Engineer, Structural (General - ,)
IN - Architect (General - RV1836-2026)
Accreditation: AIA Registered Provider J315
KS - Architect (General - RV1836-2026)
Accreditation: AIA Registered Provider J315
KS - Engineer (General - ,)
KY - Engineer (General - ,)
LA - Engineer (General - ,)
MD - Engineer (General - ,)
ME - Engineer (General - ,)
MI - Engineer (General - ,)
MN - Engineer (General - ,)
MO - Architect (General - RV1836-2026)
Accreditation: AIA Registered Provider J315
MO - Engineer (General - ,)
MS - Engineer (General - ,)
MT - Engineer (General - ,)
NC - Engineer (General - ,)
ND - Engineer (General - ,)
NE - Architect (General)
Accreditation: Vector Solutions is authorized by IACET to offer 0.10 CEUs for this program
NE - Architect (General - RV1836-2026)
Accreditation: AIA Registered Provider J315
NE - Engineer (General)
Accreditation: Vector Solutions is authorized by IACET to offer 0.10 CEUs for this program
NH - Engineer (General - ,)
NJ - Architect (General - RV1836-2026)
Accreditation: AIA Registered Provider J315
NJ - Engineer (General - 24GP000006300)
NM - Engineer (General - ,)
NV - Engineer (General - ,)
NY - Architect (General - RV1836-2026)
Accreditation: AIA Registered Provider J315
NY - Engineer (General)
Accreditation: Vector Solutions is authorized by IACET to offer 0.1 CEU for this program.
OH - Engineer (General - ,)
OK - Engineer (General - ,)
OR - Engineer (General - ,)
PA - Code Official,Certified (UCC) (General)
PA - Engineer (General - ,)
PR - Engineer (General - ,)
SC - Engineer (General - ,)
SD - Architect (General - RV1836-2026)
Accreditation: AIA Registered Provider J315
SD - Engineer (Technical - ,)
TN - Architect (General - RV1836-2026)
Accreditation: AIA Registered Provider J315
TN - Engineer (General - ,)
TX - Engineer (General - ,)
UT - Engineer (General - ,)
VA - Architect (General - RV1836-2026)
Accreditation: AIA Registered Provider J315
VA - Engineer (General - ,)
VT - Engineer (General - ,)
WA - Architect (General - RV1836-2026)
Accreditation: AIA Registered Provider J315
WI - Architect (General - RV1836-2026)
Accreditation: AIA Registered Provider J315
WI - Engineer (General - ,)
WV - Engineer (General - ,)
WY - Engineer (General - ,)
Professional Organizations
American Academy of Environmental Engineers - AAEES - Member (General - ,)
American Institute of Architects - AIA - Architects (General - RV1836-2026)
Accreditation: AIA Registered Provider J315
Canada - Alberta Architect (General - RV1836-2026)
Accreditation: AIA Registered Provider J315
Canada - Alberta Engineer (General - ,)
Canada - British Columbia Architect (AIBC) (General - RV1836-2026)
Accreditation: AIA Registered Provider J315
Canada - British Columbia Engineer (General - ,)
Canada - Manitoba Architect (General - RV1836-2026)
Accreditation: AIA Registered Provider J315
Canada - Manitoba Engineer (General - ,)
Canada - New Brunswick Architect (General - RV1836-2026)
Accreditation: AIA Registered Provider J315
Canada - New Brunswick Engineer (General - ,)
Canada - Newfoundland and Labrador Engineer (General - ,)
Canada - Northwest Territories and Nunavut Engineer (General - ,)
Canada - Northwest Territory Architect / Restricted Practitioner (General - RV1836-2026)
Accreditation: AIA Registered Provider J315
Canada - Nova Scotia Architect (General - RV1836-2026)
Accreditation: AIA Registered Provider J315
Canada - Nova Scotia Engineer (General - ,)
Canada - Ontario Architect (General - RV1836-2026)
Accreditation: AIA Registered Provider J315
Canada - Ontario Engineer (General - ,)
Canada - Prince Edward Island Architect (General - RV1836-2026)
Accreditation: AIA Registered Provider J315
Canada - Prince Edward Island Engineer (General - ,)
Canada - Quebec Architect (General - RV1836-2026)
Accreditation: AIA Registered Provider J315
Canada - Quebec Engineer (General - ,)
Canada - Saskatchewan Architect (General - RV1836-2026)
Accreditation: AIA Registered Provider J315
Canada - Saskatchewan Engineer (General - ,)
Canada - Yukon Engineer (General - ,)
International Society of Automation - ISA - Certifications (General)
National Institute for Certification in Engineering Technologies - NICET (General - ,)
Ontario Association of Certified Engineering Technicians and Technologists - OACETT - Certified Member (Contribution to Technical Knowledge)