RedVector RV-W101519

10/15/2019: LIVE INTERACTIVE WEBINAR, Geotechnical Engineering: Deep Foundations, Tuesday, October 15, 2019, 11am-1pm Eastern

10/15/2019: LIVE INTERACTIVE WEBINAR, Geotechnical Engineering: Deep Foundations, Tuesday, October 15, 2019, 11am-1pm Eastern

2 hrs. Webinar

Level: Advanced

Item#: RV-W101519

SME: Alfredo Cely, P.E., MSEM

When weak soils are encountered near the surface of a project site, or when the loads of the infrastructure require support that is stronger than what is present at the in-situ soils, professionals within the A/E/C industry rely on the use of deep foundations. Deep foundations allow the construction of our most audacious projects. In this course, engineers, architects, planners, contractors and design professionals will learn different applications and methods for the development of deep foundations, which can be used to support our most critical infrastructure to the benefit of our communities.
 
Note: This is a live webinar delivered via GoToWebinar. Session instructions will be emailed to you 24-48 hours prior to the webinar and the morning of the webinar. If you have not received your instructions for any reason please call RedVector Client Support (1-866-546-1212) the day of the event. Webinars are live and interactive. Students will have the ability to directly interact with and ask questions of the presenter.
Course Objectives
  • Based on subsurface conditions, select the use of an adequate foundation pile system to preserve the property
  • Describe the three main steps in the design-construction process for driven pile design, which focus on the safe design of foundations to preserve the welfare of the public
  • Develop an evaluation method for driven piles, based on whether they are to be placed in either cohesive or cohesionless soils
  • Identify at least two advantages of drilled shafts that can be used to maintain appropriate safety and reliability for all classes of structures
SUBJECT MATTER EXPERT: Alfredo Cely, P.E., MSEM
Alfredo Cely, P.E., MSEM Photo

Alfredo is a Civil Engineer that has managed Transportation, Land Development, Water Resources and Aviation projects from planning to construction for the past 14 years. Most recently his consulting work has focused on assisting state and local agencies in improving the safety of our transportation network. He has been responsible for several multi-modal transportation projects in the Tampa Bay Area, throughout the U.S. and abroad. He is a licensed Civil Engineer in Florida, North Carolina, and Ecuador.

 

At the University of South Florida, Alfredo serves as an instructor for the Transportation sections of the P.E. Preparation Courses hosted by the American Society of Civil Engineers’ (ASCE) Student Chapter. Alfredo is a member of ASCE’s Street and Highway Operations Committee and is an associate member of the Aviation Planning and Operations Committee. At the national level, Alfredo helps several of the Transportation Research Board Committees and is currently involved in the following committees: Low Volume Roads; Hydrology, Hydraulics and Water Quality; Pedestrian Safety; and Bicycle Transportation.

 

Alfredo served as the Chair of the local ASCE Transportation and Development Institute group during its first two years (2012-2014). The Florida West Coast Chapter of the ASCE has recognized Alfredo’s commitment to the profession and our community honoring him with the Young Engineer of the Year Award in 2014. As part of his involvement with the local engineering community, Alfredo currently serves as a Board Member of the Florida West Coast Branch for ASCE.