RedVector RV-10450

Worksite Safety 02: OSHA Electrical Safety

Worksite Safety 02: OSHA Electrical Safety

2 hrs. Online Course

Level: Fundamental

Item#: RV-10450

SME: Dan Johnson, CSP (SFI Compliance Inc.)

OSHA’s electrical standards were put in place to help minimize deaths and injuries from dangers such as electrocution, burns, electric shock, fires, and explosions. This course examines the main causes of different types of hazards and details precautions for preventing accidents. It looks specifically at the requirements of 29 CFR 1926, Subpart K – which covers the design characteristics of safe systems for use when installing and using electrical systems. 
 
OSHA recommends Outreach Training Program courses as an orientation to occupational safety and health for workers.  Workers must receive additional training, when required by OSHA standards, on the specific hazards of their job.
 
Please note: This course is not a part of the OSHA 10 Hour Construction Program. 
Course Objectives

Upon completion of this module, students should be able to: 

  • Describe four types of injuries that can result from contact with electricity
  • Name at least three warning signs that an electrical hazard may exist
  • List at least five electrical hazards that may exist on a construction site
  • Describe at least three methods for protection from electrical hazards
SUBJECT MATTER EXPERT: Dan Johnson, CSP (SFI Compliance Inc.)
Dan Johnson, CSP  (SFI Compliance Inc.) Photo
Dan Johnson, CSP, is an experienced and integrity driven Environmental, Health and Safety (EHS) professional with over 20 years of accomplishments and success on a national level. He is a Certified Safety Professional with the Board of Certified Safety Professionals. Currently the Managing Partner of SFI Compliance Inc. (www.sficompliance.com), he has also been a safety director for two national home builders and a national utility contractor, as well as numerous years as a safety consultant specializing in the construction industry. He is a skillful designer of EHS programs who has effectively executed those programs within a wide range of industries. Dan has expertise in changing the work environment through behavior based safety, while maintaining productivity. His progressive leadership experiences have produced a passion for surpassing objectives and adding value to the organization. He has extensive knowledge working with multiple jurisdictions to ensure compliance, including: OSHA, DOL, DOT, EPA, USACE and some State and Local municipalities.
 
Dan is also the author of “Jobsite First Aid—A Field Guide for the Construction Industry” and “DeWALT Construction Safety and OSHA Handbook.”
State Licenses
AL - Engineer (General - ,)
AR - Engineer (General - ,)
CA - Water Operator (Grade T1 and D1) (Safety)
CA - Water Operator (Grade T2 and D2) (Safety)
CA - Water Operator (Grade T3 and D3) (Safety)
CA - Water Operator (T4, T5, D4 and D5) (Safety)
CO - Electrician (Safety - SEI44-03)
Accreditation: Instructor Name: Dan Johnson Instructor Approval ID: INST.0000143-ELEC Provider Approval ID: PROV.0000044-ELEC
DC - Engineer (General - CE21800018)
DE - Engineer (General - ,)
FL - Contractor, Alarm System I & II (Workplace Safety - 0008134)
Accreditation: FL DBPR Approved Provider 0001771
FL - Contractor, Electrical (Workplace Safety - 0008134)
Accreditation: FL DBPR Approved Provider 0001771
FL - Contractor, Electrical Specialty (Workplace Safety - 0008134)
Accreditation: FL DBPR Approved Provider 0001771
FL - Engineer (General - 272)
Accreditation: FBPE Approved Provider 33
GA - Architect (General - RV828-2024)
Accreditation: AIA Registered Provider J315
GA - Engineer (General - ,)
IA - Engineer (General - ,)
ID - Engineer (General - ,)
IL - Architect (General - RV828-2024)
Accreditation: AIA Registered Provider J315
IL - Engineer, Professional (General - ,)
IL - Engineer, Structural (General - ,)
IN - Architect (General - RV828-2024)
Accreditation: AIA Registered Provider J315
IN - Engineer (General - Board Approved - CE21800018)
KS - Architect (General - RV828-2024)
Accreditation: AIA Registered Provider J315
KS - Engineer (General - ,)
KY - Electrical Contractor (Safety Code)
KY - Engineer (General - ,)
LA - Engineer (General - ,)
MA - Electrician (General)
MD - Engineer (General - ,)
ME - Engineer (General - ,)
MI - Engineer (General - ,)
MN - Engineer (General - ,)
MO - Architect (General - RV828-2024)
Accreditation: AIA Registered Provider J315
MO - Engineer (General - ,)
MS - Engineer (General - ,)
MT - Engineer (General - ,)
NC - Engineer (General - ,)
ND - Engineer (General - ,)
NE - Architect (General)
Accreditation: Vector Solutions is authorized by IACET to offer 0.20 CEUs for this program
NE - Architect (General - RV828-2024)
Accreditation: AIA Registered Provider J315
NE - Engineer (General)
Accreditation: Vector Solutions is authorized by IACET to offer 0.20 CEUs for this program
NH - Engineer (General - ,)
NJ - Architect (General - RV828-2024)
Accreditation: AIA Registered Provider J315
NJ - Engineer (General - 24GP000006300)
NM - Engineer (General - ,)
NV - Engineer (General - ,)
NY - Architect (General - RV828-2024)
Accreditation: AIA Registered Provider J315
NY - Engineer (General)
Accreditation: Vector Solutions is authorized by IACET to offer 0.2 CEU for this program.
OH - Engineer (General - ,)
OK - Engineer (General - ,)
OR - Contractor, Residential (General - SRA2608)
Accreditation: Provider ID: 2014RCE0077; Vector Solutions is responsible for the content of this course.
OR - Engineer (General - ,)
PA - Code Official,Certified (UCC) (General)
PA - Engineer (General - ,)
PR - Engineer (General - ,)
SC - Engineer (General - ,)
SD - Architect (General - RV828-2024)
Accreditation: AIA Registered Provider J315
SD - Engineer (Technical - ,)
TN - Architect (General - RV828-2024)
Accreditation: AIA Registered Provider J315
TN - Engineer (General - ,)
TX - Engineer (General - ,)
UT - Electrician (Professional Education - 21235)
UT - Engineer (General - ,)
UT - Plumber (Core - 21235)
VA - Architect (General - RV828-2024)
Accreditation: AIA Registered Provider J315
VA - Engineer (General - ,)
VT - Engineer (General - ,)
WA - Architect (General - RV828-2024)
Accreditation: AIA Registered Provider J315
WI - Architect (General - RV828-2024)
Accreditation: AIA Registered Provider J315
WI - Engineer (General - ,)
WV - Engineer (General - ,)
WY - Engineer (General - ,)
Professional Organizations
American Academy of Environmental Engineers - AAEES - Member (General - ,)
American Hospital Association - AHA - Certified Healthcare Facility Manager (CHFM) (General)
American Institute of Architects - AIA - Architects (General - RV828-2024)
Accreditation: AIA Registered Provider J315
Association for Facilities Engineering - AFE - Certification (General)
Association of Energy Engineers - AEE - Certification (Technical)
Board of Certified Safety Professionals - BCSP - Certification (General)
BOMI International - RPA, FMA and/or SMA (General)
Building Operator Certification - BOC - Certification (General)
Canada - Alberta Architect (General - RV828-2024)
Accreditation: AIA Registered Provider J315
Canada - Alberta Engineer (General - ,)
Canada - British Columbia Architect (AIBC) (General - RV828-2024)
Accreditation: AIA Registered Provider J315
Canada - British Columbia Engineer (General - ,)
Canada - Manitoba Architect (General - RV828-2024)
Accreditation: AIA Registered Provider J315
Canada - Manitoba Engineer (General - ,)
Canada - New Brunswick Architect (General - RV828-2024)
Accreditation: AIA Registered Provider J315
Canada - New Brunswick Engineer (General - ,)
Canada - Newfoundland and Labrador Engineer (General - ,)
Canada - Northwest Territories and Nunavut Engineer (General - ,)
Canada - Northwest Territory Architect / Restricted Practitioner (General - RV828-2024)
Accreditation: AIA Registered Provider J315
Canada - Nova Scotia Architect (General - RV828-2024)
Accreditation: AIA Registered Provider J315
Canada - Nova Scotia Engineer (General - ,)
Canada - Ontario Architect (General - RV828-2024)
Accreditation: AIA Registered Provider J315
Canada - Ontario Engineer (General - ,)
Canada - Prince Edward Island Architect (General - RV828-2024)
Accreditation: AIA Registered Provider J315
Canada - Prince Edward Island Engineer (General - ,)
Canada - Quebec Architect (General - RV828-2024)
Accreditation: AIA Registered Provider J315
Canada - Quebec Engineer (General - ,)
Canada - Saskatchewan Architect (General - RV828-2024)
Accreditation: AIA Registered Provider J315
Canada - Saskatchewan Engineer (General - ,)
Canada - Yukon Engineer (General - ,)
Canadian Registered Safety Professionals - CRSP (Safety)
Institute of Hazardous Materials Management - IHMM - Certification (General)
International Association of Electrical Inspectors - IAEI - Certifications (General)
International Facility Management Association - IFMA - Certified Facility Manager (CFM) (General)
International Maintenance Institute - IMI - Certifications (CMT, CMP, CMM, CWWMT) (General)
National Institute for Certification in Engineering Technologies - NICET (General - ,)
Ontario Association of Certified Engineering Technicians and Technologists - OACETT - Certified Member (Contribution to Technical Knowledge)