RedVector RV-10571AW

Set-Up of Engineering Controls for Mold Remediation Projects

Set-Up of Engineering Controls for Mold Remediation Projects

1 hr. Online Course

Level: Fundamental

Item#: RV-10571AW

SME: Michael A. Pinto, CSP, CMP

This course will help the project leader better plan and lead remediation projects, making more efficient use of technicians, equipment, barriers and supplies. Using numerous examples of good and bad engineering controls, we will lead you to a better understanding of how you can creatively arrange and maintain isolated work enclosures to the success of the project and health of the occupant.
Course Objectives
At the conclusion of this course, you will be able to:
  • Critically plan a project during the estimating phase, assuring project success
  • Anticipate the control of the project site’s perimeter to prevent cross-contamination from within
  • Explain how to use negative air and creative equipment arrangements to maintain a comfortable and efficient work environment
  • Describe how to minimize work outside the project scope
SUBJECT MATTER EXPERT: Michael A. Pinto, CSP, CMP
Michael A. Pinto, CSP, CMP Photo
Michael A. Pinto, CSP, CMP, is chief executive officer of Wonder Makers Environmental, Inc., a manufacturing and environmental consulting firm that specializes in identification and control of asbestos, lead, IAQ, mold, industrial hygiene, and chemical problems. Mr. Pinto is the author of over 150 published articles and several books including, Fungal Contamination: A Comprehensive Guide for Remediation. He completed doctoral course work in environmental engineering and holds numerous certifications in the environmental and safety areas including Certified Safety Professional and Certified Mold Professional. He was selected as part of the Mitigation Assessment Team for FEMA following Hurricanes Katrina and Rita. He was the lead author on the FEMA Fact Sheet Cleaning Flooded Buildings after Hurricane Sandy and was a contributor to the EPA’s Healthy Homes Initiative. He was a contributor to the section of the A.M. Best Underwriting Guide related to mold remediation and restoration contractors.
State Licenses
AK - Engineer (Health, Safety & Welfare - ,)
AL - Engineer (General - ,)
AR - Engineer (General - ,)
Canada - Quebec Engineer (General - ,)
DE - Engineer (General - ,)
FL - Building Code Administrator (General - 0610883)
Accreditation: FL DBPR Approved Provider 0001771
FL - Contractor, Certified (General - 0610883)
Accreditation: FL DBPR Approved Provider 0001771
FL - Contractor, Palm Beach County (General - 0610883)
Accreditation: FL DBPR Approved Provider 0001771
FL - Contractor, Pinellas County (General - 0610883)
Accreditation: FL DBPR Approved Provider 0001771
FL - Contractor, Registered (General - 0610883)
Accreditation: FL DBPR Approved Provider 0001771
FL - Engineer (General - 0000271)
Accreditation: FBPE Approved Provider 33
FL - Examiner (General - 0610883)
Accreditation: FL DBPR Approved Provider 0001771
FL - Home Inspector (General - 0610883)
Accreditation: FL DBPR Approved Provider 0001771
FL - Inspector (General - 0610883)
Accreditation: FL DBPR Approved Provider 0001771
FL - Interior Designer (General - AIA Reg RV1700-2023)
Accreditation: AIA Registered Provider J315
FL - Mold Assessors and Remediators (General - 0000186)
Accreditation: FL DBPR Approved Provider 0001771
GA - Architect (General - AIA Reg RV1700-2023)
Accreditation: AIA Registered Provider J315
GA - Engineer (General - ,)
IA - Engineer (General - ,)
ID - Engineer (General - ,)
IL - Architect (General - AIA Reg RV1700-2023)
Accreditation: AIA Registered Provider J315
IL - Engineer, Professional (General - ,)
IL - Engineer, Structural (General - ,)
IN - Architect (General - AIA Reg RV1700-2023 )
Accreditation: AIA Registered Provider J315
KS - Architect (General - AIA Reg RV1700-2023)
Accreditation: AIA Registered Provider J315
KS - Engineer (Health, Safety & Welfare - ,)
KY - Engineer (General - ,)
LA - Engineer (General - ,)
MD - Engineer (General - ,)
ME - Engineer (General - ,)
MI - Engineer (General - ,)
MN - Engineer (General - ,)
MO - Architect (General - AIA Reg RV1700-2023)
Accreditation: AIA Registered Provider J315
MO - Engineer (General - ,)
MS - Engineer (General - ,)
MT - Engineer (General - ,)
NC - Engineer (General - ,)
ND - Engineer (General, Health, Safety & Welfare)
NE - Architect (General, Health, Safety & Welfare)
Accreditation: Vector Solutions is authorized by IACET to offer 0.10 CEUs for this program
NE - Architect (General, Health, Safety & Welfare - AIA Reg RV1700-2023)
Accreditation: AIA Registered Provider J315
NE - Engineer (General)
Accreditation: Vector Solutions is authorized by IACET to offer 0.10 CEUs for this program
NH - Engineer (General - ,)
NJ - Architect (General - AIA Reg RV1700-2023 )
Accreditation: AIA Registered Provider J315
NJ - Engineer (General - 24GP000006300)
NM - Engineer (General - ,)
NV - Engineer (General - ,)
NY - Architect (General - AIA Reg RV1700-2023 )
Accreditation: AIA Registered Provider J315
NY - Engineer (General - NYS Sponsor #133)
Accreditation: RedVector is the approved provider of this course offering. RedVector has changed its name and is now operating as Vector Solutions.
OH - Engineer (General - ,)
OK - Engineer (General - ,)
OR - Engineer (General - ,)
PA - Code Official,Certified (UCC) (General)
PA - Engineer (General - ,)
PR - Engineer (General - ,)
SC - Engineer (General - ,)
SD - Architect (General - AIA Reg RV1700-2023)
Accreditation: AIA Registered Provider J315
SD - Engineer (Technical - ,)
TN - Architect (General - AIA Reg RV1700-2023)
Accreditation: AIA Registered Provider J315
TN - Engineer (Health, Safety & Welfare - ,)
TX - Engineer (General - ,)
UT - Engineer (General - ,)
VA - Architect (General - AIA Reg RV1700-2023)
Accreditation: AIA Registered Provider J315
VA - Engineer (General - ,)
VT - Engineer (General - ,)
WA - Architect (General - AIA Reg RV1700-2023)
Accreditation: AIA Registered Provider J315
WI - Architect (General - AIA Reg RV1700-2023)
Accreditation: AIA Registered Provider J315
WI - Engineer (General - ,)
WV - Engineer (General - ,)
WY - Engineer (General - ,)
Professional Organizations
American Academy of Environmental Engineers - AAEES - Member (General - ,)
American Council for Accredited Certification - ACAC - Member (General)
Accreditation: RedVector is an independent course provider not affiliated with the American Council for Accredited Certification (ACAC). ACAC does not develop, accredit or approve training courses, nor does it contract with course providers.
American Hospital Association - AHA - Certified Healthcare Facility Manager (CHFM) (General)
American Institute of Architects - AIA - Architects (General - AIA Reg RV1700-2023)
Accreditation: AIA Registered Provider J315
BOMI International - RPA, FMA and/or SMA (General)
Canada - Alberta Architect (General - AIA Reg RV1700-2023)
Accreditation: AIA Registered Provider J315
Canada - Alberta Engineer (General - ,)
Canada - British Columbia Architect (AIBC) (General - AIA Reg RV1700-2023)
Accreditation: AIA Registered Provider J315
Canada - British Columbia Engineer (General - ,)
Canada - Manitoba Architect (General - AIA Reg RV1700-2023)
Accreditation: AIA Registered Provider J315
Canada - Manitoba Engineer (General - ,)
Canada - New Brunswick Architect (General - AIA Reg RV1700-2023)
Accreditation: AIA Registered Provider J315
Canada - New Brunswick Engineer (General - ,)
Canada - Newfoundland and Labrador Architect (Health, Safety & Welfare - AIA Reg RV1700-2023)
Accreditation: AIA Registered Provider J315
Canada - Newfoundland and Labrador Engineer (General - ,)
Canada - Northwest Territories and Nunavut Engineer (General - ,)
Canada - Northwest Territory Architect (General - AIA Reg RV1700-2023)
Accreditation: AIA Registered Provider J315
Canada - Nova Scotia Engineer (General - ,)
Canada - Ontario Architect (General - AIA Reg RV1700-2023)
Accreditation: AIA Registered Provider J315
Canada - Ontario Engineer (General - ,)
Canada - Quebec Architect (General - AIA Reg RV1700-2023)
Accreditation: AIA Registered Provider J315
Canada - Saskatchewan Engineer (General - ,)
Canada - Yukon Engineer (General - ,)
International Facility Management Association - IFMA - Certified Facility Manager (CFM) (General)
International Maintenance Institute - IMI - Certifications (CMT, CMP, CMM, CWWMT) (General)
International Society of Automation - ISA - Certifications (General)
National Institute for Certification in Engineering Technologies - NICET (General - ,)
Ontario Association of Certified Engineering Technicians and Technologists - OACETT - Certified Member (Contribution to Technical Knowledge)