To ensure the health and safety of yourself, your co-workers, and the citizens of Texas, it is crucial to stay current with all relevant laws, rules, regulations, and codes in the industry. Part one of this course covers the Administrative Rules of the Texas Department of Licensing and Regulation, Title 16 Texas Administrative Code, Chapter 73, and the Texas Occupations Code, Chapter 1305. This content is a required component of the continuing education needed to renew your electrician license.​ 

Part two of this course covers several of the most significant changes in the 2024 edition of NFPA 70E ®, with a focus on the most commonly used sections of the standard. 

The final portion of this course explores load calculation requirements and key updates in the 2026 National Electrical Code. It examines how modern electrical systems, including energy management systems and power control systems, influence load calculations and system design.

After successfully completing this course, you will be able to:
Part 1
• Recall key definitions used frequently in the trade
• List the required on-the-job training for a license issued by the department
• Describe the application process for an applicant and the required exam
• Recall the frequency and fees in which licensees must renew their license with the Texas Department of Regulations (TDLR)
• List the Electrical Contractors’ responsibilities
• List the responsibilities of all persons performing electrical work
• Recall the Standards of Conduct within any geographic location in the state when performing or offering to perform electrical work

Part 2
• Discuss the global changes that occurred in the 2024 edition.
• Define what an electrically safe work condition is and when it is required.
• Understand the process of establishing and verifying an electrically safe work condition.
• Explain why the boundaries of the electric shock approach were changed and how to address high-altitude installations.
• Describe the requirements for arc flash signage.
• Verify the PPE requirements for hand protection.

Part 3
• Define “energy management system”
• Describe what a power control system is
• Explain why the scope of Article 120 was expanded
• Discuss why continuous loads are calculated at 100 percent
• State the allowances for noncoincident loads
• Recall how a power control system can be used in a load calculation
• Describe how to calculate the minimum number of circuits required for a dwelling unit
• Explain how to calculate clothes dryers and fixed multioutlet assemblies
• Discuss the reduced calculation for lighting in dwelling units
• Explain the demand factors for clothes dryers and instantaneous water heaters
• Describe the general rule for EVSE load calculations
• State the requirements for using the optional calculation method for dwellings
• Discuss the simplified rules for calculating loads for existing dwellings
• Explain why the total demand for multifamily dwellings was revised
• State how to determine existing loads
• Describe the receptacle demand factors for health care facilities
• Detail the demand factors for patient care-related equipment in health care facilities
• Identify the load calculations for RV parks
• Discuss the load calculations for mobile and manufactured home parks